Product introduction: This 1K High Quality Basecoat Car Paint product has the effect of Rose fuchsia, purple on the front side, bright color and high saturation
Model NO. | C-135 | Substrate | Steel |
Certification | ISO14001 | Tin | Matel and Plastic |
Appearance | Liquid | Level | Finish Coat |
Main Raw Material | Acrylic | Method | Spray |
Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
Shelf Life | 2Years | Qty/CTN | 12tins |
Trademark | Meklon | HS Code | 320820 |
P-1K 135 Car Paint
Product Features: 1K High Quality Automotive Basecoat Car Paint It is composed of a variety of weather-resistant resins with high quality and strong covering
power.It can be formulated into one component base paint with various plain colors, metal effects and pearl effects, and has excellent interlayer adhesion.
Applicable Substrate: 1K High Quality Automotive Basecoat Car Paint After sanding, completely dry old paint layers and painted surfaces in the Ferrari range, etc.
2K Solid Color Tinters
Features: It is a bi-component car refinish paint series, high quality single coat system. It can be cured under room temperature or through low-temperature baking. With the following
advantages: fast drying, high hardness, high gloss, bright color, excellent covering power, easy spraying, etc.
Mixing ratio: 2K paint: Hardener: Thinner = 2: 1: 0.3-0.5 (volume ratio)
1K paint: thinner = 1 : 1-1.2
Applicable period: At 20 ℃, for about 3 hours.
Drying Time: At 20 ℃, 40 minutes for surface dry, 12 hours for thorough dry. With 60 ℃ baking, 40 minutes thorough dry.
Package: 1L *12, 1L *6, 4L *4
Storage Period: At 20 ℃ with original sealed, can store more than 18 months.
SURFACE PREPARATION:
1. Surface Should Be Clean And Free Of Dust, Grease And Oil.
2. Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat.
Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats
Apply Using a Spray Gun Nozzle:
1.2-1.4mm (Gravity Spray Gun)
1.3-1.5mm (Selectional Spray Gun)
- Spraying Pressure: 3-4 Bar.
- Spraying Viscosity: 13~18s(Ford Cup #4 At 20℃)
- Number Of Coats: 3 Coats Maximum.
Customer Feedback