Sales

AATCC 42 Impact Penetration Tester is suitable for testing the water resistance of any textile material.

This tester can be used to predict the rain penetration protection of textile materials, especially for testing clothing textile materials.

Standards : AATCC 42
Partners :
Certificates : CE, ISO 17025
Brand : UTSTESTER

Product Detail

Overview

Impact Penetration Tester MB17-2 is suitable for testing the water resistance of any textile material.

This tester can be used to predict the rain penetration protection of textile materials, especially for testing clothing textile materials.

Standards

AATCC 42

Test Principle

A certain amount of water is sprayed on the test sample which is tensioned on the surface and covered by the measured blotting paper. The weight of the blotting paper is then weighed again to determine the water penetration and the classification of the corresponding sample.

Key Specifications

Model	MB17-2
Spacing between the bottom of the nozzle and the center of the sample	60cm
Test water consumption	500ml
The width of the jig	152mm
The sample Angle	45°
Tighten clamp	453.6g(1Lb)
Nozzle	The diameter is 56mm, the diameter of water jet hole is 1mm, and 25 holes are evenly distributed
Sample	178x330cm, length parallel to longitude
External dimension	34x54x108cm
Weight	18kg

Material to be Tested

AATCC 42 Impact Penetration Tester MB17-2, is applicable for any textile fabric, which may or may not have been given a water-resistant or water-repellent finish. Especially suitable for garment fabrics.

Impact Penetration Tester MB17-2