Hydraulic Bursting Strength Tester, Adopts hydraulic method to determine the burst strength and burst expansion property for various textiles, including knitted fabric, woven fabric and non-woven fabric, laminated fabric under standard or wet condition.
Overview
Hydraulic Bursting Strength Tester M007A, Adopts hydraulic method to determine the burst strength and burst expansion property for various textiles, including knitted fabric, woven fabric and non-woven fabric, laminated fabric under standard or wet condition.
Standards
|
ISO 13938-1, GB / T 7742, FZ/T 60019, FZ/T 01030, BS 4768, Woolmark TM29, WSP 30.1, JIS L 1018.6.17, ASTM D 3786, etc
|
Hydraulic Bursting Strength Tester M007A: Clamp sample on the extensible diaphragm via round sample holder. Conduct air pressure underneath diaphragm to make diaphragm and sample expand. Under constant speed and adding pressure until sample burst, so as to measure the burst strength and burst expansion.
Key Specifications
Model
M007A-1
M007A-2
Testing range
2.00 Mpa
10.00 Mpa
Minimum scale
0.001 Mpa
0.003 Mpa
Elastic membrance
≦2mm
Maximum expansion
75 +/-0.02mm
Pressurization rate
20-600 ml/min
Test methods
Constant burst, constant pressure, constant expansion, timing.
Test units
Freely switched: Kpa, atm, mmHg, lb/in2, kgf/cm2
Output mode
Print our, display and support online operation
Power supply
1 Phase AC 220V±10% 50Hz 1200W
Dimensions(L x W x H)
675mm x 440mm x 630mm
Weight
200KG
Material to be Tested
Hydraulic Bursting Strength Tester M007A, is applicable for various textiles, including knitted fabric, woven fabric and non-woven fabric, laminated fabric
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
