SANG diamond cup wheel Used for charmfering, beveling and grinding stone and concrete edges & surface. Grit: 36#, 46#, 60#, 80#, 100#, 120#, 200# There is universial connection from 150mm (22.23/M14)
Due to its simple flow efficient and virtually maintenance-free design, thestainless steel ball checkvalve is commonly specified and used in submersible waste water lift stations.
Surgical Dental Parts--Dental implant parts, suitable for dental surgery, dental laboratory.We accept OEM/ODM service,can custom as sample or drawing.
The DN150 PN10 unidirectional knife gate valve features a single piece, stainless steel body design provides tested performance in applications ranging from general purpose to severe media.
Thisconcentricbutterfly valve is a lug type valve with threaded holes and can be used for many applications. The valve can be used as a stopper, a tap for discharging at the end of the pipeline, open/close and flow control.
The swing check valve is made of A216, a kind of WCB. Manufactured according to BS1868, the check valve is 6 inch and 150LB. And the valve is capable in working temperature between -19 to 425 degree Celsius.
DN50 PN160 floating ball valve is made according to API6D standard. The valve body is made of A105. It has the structural characteristics of floating ball and structural length of 235mm. It has a lever operation mode and its connection mode is lens gasket.
The single-disc check valve, made of CF8, has excellent resistance to corrosion. Designed in accordance with API594, the valve is of a WAFER type.
DN400 PN10 check valve is made according to DIN standard. The valve body is made of WCB. It has the structural characteristics of swing type and structural length of 310mm. It has the connection mode of RF. This valve has a built-in damper, which is mainly used for shock absorption and energy dissipation.
This butch of gate valves are ranged from 3 inches to 32 inches. With non-rising gate valves and solid wedge, which are not regularly found in such big sized valves, these gate valves are quite special and reliable.
8" 2500LB ball valve is made according to API 6D standard. The valve body is made of F51. It has the structural characteristics of trunnion mounted ball, full bore. It also has the design of anti-fire, anti-static and anti-flying valve stem. In addition, it also meets NACE MR0175 requirements.
Made as per API6D, the two pc floating ball valve, 3/4inch and 150LB, has different ends.Find your floating ball valve or other valves easily in Dervos.
Made of A182-F316L, 1/2’’ 150LB ball valve is made according to API 608 standard. It has the structural characteristics of floating ball and two-piece ball valve.Its connection mode is RF and there is a handle operation mode.
The gate valve, made according to API 600, is made of CF8, one kind of cast steel. The 4 inch valve is equipped a handwheel, outside yoke, bolted bonnet and extended bonnet. All the accessories are traceable.
With outside screw and yoke, handwheel operation, NPT, the forged steel globe valve is made of A105 and designed as per BS5352.
The 6 inch 150 LB single disc wafer check valve, designed per API 594, has one disc and wafer connection. It will have the best performance under -29 to 350 Celsius degree.
Chinese Valve manufacturer Dervos supplies Check Valve that featured with through conduit, plug type disc and replaceable seat. Expect these 14 inch 150LB check valve, other types valves of different materials, sizes are also available.