FSD22 series high-precision laser displacement sensor

Sales

♦Supply voltage: 24V DC, ambient temperature: +20°C, response time: 10ms, and analog output value ofmeasurement center distance are used for unspecified measurement conditions, The subiect is white ceramics

♦This is based on the FDA Standard, accordina to Laser Notice No, 50 of the FDA Standard.

♦This is the size in the measurement center distance. These values were defined by using 1/e2 (approx.13.5%) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point maybe higher than at

the point and this may affect the measurement value.

Product Detail

FSD22 series high-precision laser displacement sensor

SCH-FSD22 series switching analog measurement thickness high and low flatness sensor laser displacement distance sensor

Technical Specification

Type		Measurement center 100mm type
Part number	Analog+NPN output	FSD22-100P-UI
Measurement center distance		100mm
Measurement range		±35mm
Beam diameter (Note 3)		Approx. ø120μm
Repeatability		100μm
Linearity		±0.3%F.S.
Temperature characteristic		0.03%F.S./°C
Light source		Red semiconductor laser Class 2 [JIS / IEC / GB / FDA (Note 2)] Max. output: 1mW, Emission peak wavelength: 655nm
Supply voltage		12 to 24V DC ±10%, Ripple P-P 10% or less
Power consumption		40mA or less (at 24V DC supply voltage), 65mA or less (at 12V DC supply voltage)
Control output	Control output	PNP open-collector transistor
		•Maximum source current: 50mA
		•Applied voltage: 30V DC or less
		(Between control output to +V)
		•Residual voltage: 1.5V or less
		(At 50mA source current)
		•Leakage current: 0.1 mA or less
	Output operation	Switchable either Light-ON or Dark-ON
	Short-circuit protection	Incorporated (Auto reset type)
Analog output	Analog voltage output	•Output range: 0 to +5V (at alarm: +5.2V)
		•Output impedance: 100Ω
	Analog current output	•Output range: 4 to 20mA (at alarm: 0mA)
		•Load impedance: 300Ω or less
Response time		Switchable between 1.5ms / 5ms / 10ms
		PNP non-contact input
		•Input conditions
		Invalid: 0 to +0.6V DC or Open
		Valid: +4 to +V DC
		•Input impedance: Approx. 10kΩ
Protection		IP67 (IEC)
Degree of pollution		2
Ambient temperature		-10 to +45°C (No dew condensation or icing allowed), Storage: -20 to +60°C
Ambient humidity		35 to 85% RH, Storage: 35 to 85% RH
Ambient illuminance		Incandescent lamp: Acceptance surface illuminance 3,000ℓx or less
Operating altitude		2,000m or less
Cable		0.2mm2 5-core composite cable, 2m long
Material		Enclosure: Aluminum die-cast, Front cover: Acrylic
Weight		approx. 85g (including cable)
Applicable standard		EMC Directive Compliance, FDA Standard, UL Recognition