Excavator Undercarriage Part SK140 Top Roller Carrier roller  Wheel Suit For Kobelco

Sales Excavator Undercarriage Part SK140 Top Roller Carrier roller Wheel Suit For Kobelco

Excavator Undercarriage Part SK140 Top Roller Carrier roller  Wheel Suit For Kobelco 

  The four wheels refer to: rollers, drive wheels, idlers, and carrier pulleys. One belt refers to the tracks. As the name suggests, the rollers act as support and are located between the lower surface of the left/right beam of the chassis frame and the track. According to the tonnage of the excavator, there are usually 5-10 on one side. The driving wheel plays the role of driving the track, which is fixed on the travel motor, and the drive of the travel motor is transmitted to the track through the gear structure, usually one on each travel motor. The idlers act as guides the tracks, located at the opposite end of the drive wheels, usually two per excavator. The carrier roller plays the role of holding up the track, and according to the tonnage of the excavator, there are usually 1-2 carrier rollers on one side.

 

  Our products are according to the standard of OEM to manufacture.

 

Product Detail  

Excavator Undercarriage Part SK140 Top Roller Carrier roller  Wheel Suit For Kobelco 

  Rollers: The rollers are fixed under the wheel frame with screws to support the mass of the machinery and distribute the mass over the track shoes. At the same time, it also relies on its roller flange to clamp the chain rail so that the track does not slip laterally (derailment), ensuring that the machine moves in the direction of the track, with small rolling resistance and the life of the operation in mud and water.

  Drag sprockets: prevent the sagging of the track and the falling off of the track when walking and reduce its up and down vibration.

 

  Idler: The idler is mounted on the track and is used to guide the track.

 

Komatsu excavator and dozer track roller part number list:

 

Rollers(CR=carrier roller, SF=Single Flange track roller, DF=Double Flange track roller)
Komatsu Bulldozers
Application Usco Part No Pos Alternative Nos. Berco Ref ITM Ref Notes
D40, D50 140-30-00053 SF 131-30-000343 KM859 A4060000M00  
140-30-00063 DF 131-30-000353 KM860 B4060000M00  
141-30-00073 CR   KM103 C4060100M00  
D65 141-30-00575 SF 141-30-00576,-00578 KM868 A4065000M00  
141-30-00585 DF 141-30-00586,-00588 KM869 B4065000M00  
141-30-00563 CR 141-30-00565,-00568 KM118 C40651A0M00  
D65E-12聽 14X-30-00081 SF 14X-30-00082,-14100 KM2101 A40650E0M00  
D65EX-12 14X-30-00091 DF 14X-30-00092,-14200 KM2102 B40650E0M00  
  14X-30-00142 CR 14X-30-00140,-00141 KM2105 C40651E0M00  
D85 155-30-00126 SF 155-30-00250, -00127 KM351 A40850A0M00  
155-30-00116 DF 155-30-00240,-00117 KM353 B40850A0M00  
155-30-00233 CR 155-30-00232,-00234 KM120 C40851A0M00  
D155-1 D155-2 175-30-00760 SF 175-30-00484,-00489 KM122 A4015000M00  
175-30-00770 DF 175-30-00494,-00499 KM123 B4015000M00  
175-30-00515 CR 175-30-00517,-00471 KM124 C40151G0M00 D155AX-3
D155-3聽 17A-30-00070 SF   KM2265 A40159D0M00  
D155AX-3 17A-30-00080 DF   KM2266 B40159D0M00  
D355 195-30-00335 SF 195-30-00336 KM926 A4035000M00  
195-30-00345 DF 195-30-00346 KM927 B4035000M00  
195-30-00105 CR 195-30-00106 KM578 C4035100M00  
D275 17M-30-00220 SF        
17M-30-00230 DF        
195-30-00580 CR   KM2160   PC650-5
D375A-1 195-30-00562 SF 195-30-00561 KM1039    
195-30-00572 DF 195-30-00571 KM1040    
195-30-00580 CR        
D375A-2/3 195-30-01051 SF 195-30-01011,-01010 KM1272 A4037000M00  
195-30-01061 DF 195-30-01021,-01020 KM1279 B4037000M00  
195-30-01041 CR 195-30-01040 KM1281 C4037100M00  
Komatsu Excavators
PC60-5/ 6 201-30-00290 SF 201-30-00291 KM1690    
PC75, PC95 (B1) VA380 SF   VA380 A14010B1M00  
B14010B1M00 DF     B14010B1M00  
PC100-120 FAI 203-30-00222 SF 20E-30-K1580 KM1705 A40120A0M00  
PC120-5 203-30-00230 CR 203-30-00150 KM2794 C4012000M00  
PC200-2/3/5/6 PC220-2/3/5/6 PC210-6 205-30-K1200 CR 20Y-30-00021,-00022 KM1640 C40201A0M00  
205-30-00171 SF 205-30-00172,-76101 KM1179 A40200F0M00 PC200-2 & PC220-2
20Y-30-00130
20Y-30-00011 SF 20Y-30-00112, KM1428 A40200E0M00 PC200-3/5/6 PC220-3/5/6 PC210-6
20Y-30-00014
PC300-3/5 207-30-15102 CR 208-30-00320 KM1817 C40301B0M00 & PC400-5
207-30-K1800,-16102
207-30-00140
207-30-00150 SF   KM1429 A40300B0M00  
PC400-3/5 208-30-00210 SF   KM1743 A4040000M00  
PC650-5 209-30-00191 SF 209-30-00121 KM2143 -  
PC1000 21N-30-00023 SF   KM2503    
21N-30-00030 CR        
Hitachi excavator bottom roller part number list
Rollers(CR=carrier roller, SF=Single Flange track roller, DF=Double Flange track roller)
Application Usco Part No Pos Alternative Nos. Berco Ref ITM Ref Notes
Hitachi
EX60-1 9066207 SF        
EX60-2,3 9096970 SF     A7606000M00  
EX60-1/2/3 9108841 CR     C7606000M00  
EX60-5 9177016 SF     A76060A0M00  
EX60-5 9153288 CR     C76061A0M00  
EX100, EX120 9066508 SF 9114315 HT49 A1813000M00  
EX100M, EX150 9066691 SF     A7615000M00  
EX200-2/3 9089173 SF 9132602, 9114681 HT50 A7620000M00  
9089636 CR AT152079 ID861 C15690E0M00  
EX215 9134243 SF   FT3612 A76200A0M00  
EX220 9066509 SF   HT47 A7622000M00  
EX300-1 9114682 SF        
9105750 CR        
EX300-2,5 (B6) 9066690 SF 91,146,199,114,682 LH696 A14060A0M00 Also for 235/B
9096966 CR 9149839, 9062405 FT278 C4030000M00  
EX400-5 (B7) 9115234 SF 9115234 LH90 A140700AM00  
9115233 CR 9072634, 71401039 FT2990 C7140000M00  
Fiat-Hitachi
FH120/130/150 4509639 SF   SJ68 A21900A0M00  
FH120 9105749 CR   FT2744 C7615000M00  
FH200 (B5) 45013640 SF 14260870 KL18 A1405000M00  

 

Company Profile

  Changte Machinery Parts Co., Ltd  is a collection of industry, trade as one of the modern parts company, specializing in the production and sales of excavator and bulldozers parts, the main products: chassis parts, vulnerable parts, seals, electrical parts, engine parts, hydraulic parts (system), wear-resistant parts, filter parts, etc.

Our products can be used with various machines such as KOMATSU, CATERPILLAR, HITACHI, SUMITOMO, DOOSAN, HYUNDAI, VOLVO, KATO, JCB, KOBELCO, SANY, XCMG, LiuGong, LIEBHERR, ZOOMLION, SUNWARD, CSAE, WORLD and so on. We can also design special products as our customer requests. We offer high quality products, shorter delivery times and the best logistics.

 

FAQ:

 

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: FOB
Q4. How about your delivery time?
A: Generally, it will take 20 to 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
   2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from

 

 

 

 

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.