ETL CE listed 12v 200w dimmable led driver

Sales

SMT-012-200VD is 200w 12v dimmable power supply, for lighting , LED XPL Linear Light of Hylite Led Lighting ultra-efficient use. It can dimming well with Lutron 0-10v dimmers.

Size : 255*80*53mm
Working Mode : Constnat Voltage LED Driver
Shape & Size : Stardard Size
Output Voltage : 12/24Vdc
Output Power(Watt) : 200W
Input Voltage : 100-265Vac
Dimming Mode : 0-10V Dimming
Weight : 1800g
Certification : ETL
Warranty : 5 Years

Product Detail

12v dimmable power supply are available in 20–200 watt models. The amount of power needed for your application is dependent on the watts required by your LED lighting. it can working with Hylite Led Lighting LED XPL Linear Light wet locations.

Specification

Model		SMT-012-200VD	SMT-024-200VD
Output	DC Voltage	12V	24V
	Voltage Accuracy	±0.5V
	Rated current	0~16.67A	0~8.33A
	Rated power	200W	200W
Input	Voltage Range	100-265VAC
	Frequency Range	47~63HZ
	Power Factor ( Typ.)	PF≧0.90/120V / PF≧0.90/220V
	Full Load Efficiency(Typ.)	>88%(120V)/ >88%(220V)	>88%(120V) / >88%(220V)
	AC Current(Typ.)	2.104A@120V	1.148A@220V
	Leakage current	﹤0.9mA/120VAC / ﹤0.7mA/220VAC
Protection	Short Circuit	Protection type: Hiccup mode, recovers automatically after fault condition is removed
	Over voltage	≦150VAC / ≦280VAC
	Over temperature	100℃±10℃ shut down o/p voltage, re-power on to recover
Environment	Working TEMP.	-40~+50℃
	Working Humidity	20~95%RH,non-condensing
	Storage TEM.,Humidity	-40~+80℃,10~95%RH
	TEMP.coefficient	±0.03%/℃(0~50℃)
	Vibration	10~500Hz,5G 12min./1 cycle,period for 72min.each along X,Y,Z axes
Safety&EMC	Safety standards	EN61347-1 EN61347-2-13 IP67
	Withstand voltage	I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
	Isolation resistance	I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH
	EMC EMISSION	Compliance toEN55015,EN61000-3-2 (≧50%load)
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547,A light industry level
Others	Weight	1.8Kg
	Size	2558053mm(LWH)
	packing	440295145mm/8pcs/CTN 2659855 mm for inner box
Notes	1. All parameters NOT specially mentioned are measured at 220VAC input , rated load and 25℃of ambient temperature.
	2. Ripple& noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
	3. Tolerance:includes set us tolerance,line regulation and load regulation .

Compatible Light Type

SMT-012-200VD 12v dimmable power supply 200w is needed instead of standard 110-130vac/170-265vac to 12v transformers commonly used for halogen bulbs. Specifical in Hylite Led Lighting LED XPL Linear Light directional illumination.

200w dimmable led driver