Smarts 150 watt led drivers can be attached with junction box for damp and dry locations in North American. Those Dali drivers are fully conform to ETL & CE that absolutely safe to use at 110VAC and 220VAC.
Specification
Model | SMT-012-150VM | SMT-024-150VM | |
Output | DC Voltage | 12V | 24V |
Voltage Tolerance | ±0.5V | ||
Rated current | 0 - 12.5A | 0 - 6.25A | |
Rated power | 150W | 150W | |
Input | Voltage Range | 100-265VAC/10-130VAC/170-265VAC | |
Frequency Range | 47 - 63HZ | ||
Power Factor | PF≧0.98/120VAC PF≧0.98/230VAC PF≧0.95/265VAC(Full loading) | ||
Full Load Efficiency(Typ.) | >89% | >90% | |
AC Current(Max.) | 1.49A | 1.47A | |
Leakage current | <0.5mA | ||
Protection | Short Circuit | Protection type: Hiccup mode, recovers automatically after fault condition is removed. | |
Over Load | ≤120% | ||
Over Circuit | ≤1.2*Iout | ||
Protection Class: | Ⅰ | ||
Over temperature | 100℃±10℃ shut down o/p voltage, re-power on to recover | ||
Environment | Working TEMP. | -40 - +60℃ | |
Working Humidity | 20 - 95%RH,non-condensing | ||
Storage TEM.,Humidity | -40 - +80℃,10 - 95%RH | ||
TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||
Vibration | 10 - 500Hz, 5G 12min./1 cycle, period for 72min.each along X,Y,Z axes. | ||
Safety & EMC | Safety standards | EN61347-1 EN61347-2-13 IP66 | |
Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25℃/70%RH | ||
EMC Emission | EN55015,EN61000-3-2 (≥60%load) | ||
EMC Immunity | EN61000-4-2,3,4,5,6 ,11,EN61547,A light industry level (surge4KV) | ||
Others | Weight | 1.6Kg | |
Size | 256*78*47mm(L*W*H) | ||
packing | 305*295*210mm/10pcs/CTN | ||
Notes | 1. All parameters NOT specially mentioned are measured at 110VAC, 230VAC input , rated load and 25℃of ambient temperature. | ||
2. Tolerance: includes set us tolerance, line regulation and load regulation . | |||
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |
Compatible Light Type
Except waterproof led power supply 150w, Smarts DALI drivers can power LED strip Lights with a range between 10w watts and 180 watts. The klusdesign LED strips is one of your best choice.
Related Products
This is the led driver 150w wiith same look like Dali led driver 150W but operates in PWM 0 10V dimming mode.
Acheived ETL approval, and has 5 years warranty.
Mode:SMT-012-150VD
Dimming Mode : 0-10V Dimming
Output Power : 150W
intput voltage:100~265V AC
Size:256*78*47MM (L*W*H)