Characteristic:

1, in the high temperature, high temperature conditions, the long-term use does not change color.

2, there are high heat variable temperature, but also high temperature resistance, and excellent moisture resistance.

3, can be transparent, but also can do any color changes.

 

Features: 
Features and Benifits of JC2120 Laminating Epoxy Resin and Hardener System

• High level of UV resistance, eliminating fading and yellowing

•Ultra Clear

• Mixes and blends with Resin Tints and Pigments

• Excellent Adhesion to Polyester Filler Coats

• Solvent Free

• Excellent Clarity

• Rapid Fibre Wet-Out

• Low Odor

• Room-temperature cure

• Competitive Pricing

• Excellent resistance to yellowing ensure a lighter, stronger, more durable board

• Rapid room-temperature cure for surfboard lamination and cures to a clear, bloom free finish

• Perfect for production laminating and sandwich vacuum techniques

MEASURING

With gloves on, pour equal amounts of resin and hardener into a mixing cup. And then pouring the mixture into another clean mixing cuo to make sure you are mixing it well.

TIP - Mix up a little more than you think you'll need because you want to completely cover your work in one shot and not have to mix more later.

MIXING

Stir really well for at least 3 minutes. Scrape the sides and the bottom to make sure you're being thorough (unmixed material will leave you with sticky spots that just won't cure). Once you put the resin and hardener together, you'll have about 40 minutes of working time before the resin thickens and cures.

POURING

After making sure your piece is level, go ahead and pour AmazingResin over your work. Don't be scared! It'll start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You'll notice bubbles will begin to rise to the surface. Many of these will pop on their own, but you can also pop them by torch.

TIP - Wooden panels work best for large pieces rather than canvas because they won't sag under the weight of the resin.

WAIT AmazingResin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.CLEAN UP - To reuse your mixing tools, wipe them down with a paper towel before the resin dries.

Our JC2120 Laminating Epoxy Resin and Hardener System is a high quality resin which can be used for a wide range of applications, from fiber-reinforced composites to thin film epoxy coatings,such as fiberglass, carbon fiber, kevlar, or many other types of composite reinforcement. The syrup-like consistency will generate fast wet-out and easy application of any reinforcement.

---

This Epoxy Resin System is 2:1 by weight,a low viscosity, clear, low odor epoxy that is not only ideal for layup use, but also as a sealer of porous substrates, such as wood. Because of its penetrating power, it is also excellent for boat repair and general marine repair

Our Company

---