Active harmonic filter is connected in parallel with non-linear loads, and uses one set of CT to detect the load current. It calculates each order harmonic current by FFT algorithms in its DSP microchips, and then generates a compensating current with the same amplitude but opposite phase angles to the detected harmonic current, which cancels out the original load harmonics.Not only eliminates harmonic current from the load side, but it also mitigates harmonic voltage caused by harmonic currents. The AHF system can also improve power factor (PF) and correct load imbalances in the power system.

Email: sales3@askplc.com Mobile: 86-18150117685

YOKOGAWA AAB841 Analog I/O Module sales6@askplc.com Brand new in sealed box,warranty period from the date of acceptance of 12 months

ABB 3BHE013299R0022 LTC743CE22 Circuit Board sales6@askplc.com

The trail camera supports 4K high-resolution video recording and 30 MP image, featured with motion-activated 3 sensors, which allows you to enjoy the wonderful animal world through super crystal pictures.

The 5x5mm FPC tag is based on polyimide or polyester film, which has high reliability and excellent flexible printed circuit board. It has the characteristics of high wiring density, light weight, thin thickness, and good bendability.Due to the limit space to put the NFC tag inside, the traditional aluminum antenna couldn't have the mini size.But the 5*5mm RFID mini rewritable small nfc tag with copper antenna works perfectly in this situation.With so small size this kind of tags usually used in various electronic devices such as Bluetooth speakers, NFC rings, NFC wristbands, etc.

Features Low resonant impedance Small size, Light Weight Low cost timing solution Applications Clock oscillation for micro-controllers Telephones Household electric applications

GE Multilin 469 Motor Contact me on WhatsAPP: +86 18030132586 Email me: sale2@askplc.com

>Swipe speed:<200 milliseconds>Wiegand output: 26 bits/34 bits>Software version: V7.107 or above>Hardware driver: V8.92 or above>Output power: DC12v 10OomA (power supply lock and card reader)

The application of Quartz Lens View Angle deg 30° UV LED for Printing Curing Wavelenth 365-415nm is for UV Curing.

Energy Saving Bar Type LED UV Curing System, This kind of UV LED curing system can be used for curing UV ink, UV varnish and UV paint and is suitable for flex printer, offset printer, flatbed printer and flexo printer.

CWDM MUX DEMUX,Multiplexing up to 8 Channels on Dual Fiber Monitor Port for Troubleshooting, 1310nm Port for Legacy Traffic Passive, Protocol Transparent for Ethernet, FC, OTN, SONET/SDH, etc. Fully Compatible with All ITU-T 1G/10G/25G CWDM Optics Applied to Metro, Regional CWDM Networks

13.56MHz FM11RF08 MF 1K Wooden RFID Cards are wood material laminated with rfid antenna and chips .They are 100% pure wood material and pvc free ,different kinds of wood material can be options and color printing ,engrave numbering ,encoding are available .Comparing with plastic material ,it can 100% enrivonment and non-toxic , various of wood materials can be optional .

Fpcb tag is based on polyimide or polyester film, which has high reliability and excellent flexible printed circuit board. It has the characteristics of high wiring density, light weight, thin thickness, and good bendability. With small size this kind of tags usually used in various electronic devices such as Bluetooth speakers, NFC rings, NFC wristbands, etc.

It realizes 3km wireless communication & real-time high-definition video monitoring. It’s used in water rescue, traffic detection and so on.

LED Light Strip 12V RGB Color Changing Flexible Light Belt Kit 300 SMD5050 Wifi LED Light With Remote Control

AC to DC 24V 12W Constant voltage LED power supply

RFID key fobs and tags come in 125 KHz, 13.56 MHz and UHF and are perfect for RFID access control, RFID key management, RFID key tagging, RFID building and asset security as well as branded customer loyalty and marketing programs.

3.3KV local reactive power compensation systems( APFC automatic power factor correction) are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.