Static Var generator SVG is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.
AC to DC 24V 150W Constant voltage LED power supply
Foldable Solar Panel Charger is portable and convenient to carry while hiking, camping, traveling and doing any other outdoor trips and activities.
6KV APFC panel (automatic power factor correction)/ individual reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.
125KHz Low Frequency RFID TK4100 ID Cards with CR80 Credit Card Size is a passive contactless RFID cards，using 100% full new plastic PVC material, and good quality copper wire to produce antenna.To 100% make sure stable function with great reading performace. The reading distance can be reached up to 10cm.
5G & WiFi-6 Smart Router System (CPE), is based on brand-new embed platform, it can be satisfied with growing-up mobile connections requirements and provides the fast speed beyond your imagination.
>Input voltage: DC12V>Sensing distance: 3- 7cm>output protocol: WG26/34
> Card type: 125KHz or 13.56MHz Card> PCD-96A EM: 125KHz (RS232, TTL, RS485 Active mode, RS485 Passive mode)> PCD-96A Mifare: 13.56MHz (RS232, TTL, RS485 Active mode, RS485 Passive mode)
Alarm flashes when rescue robot is on its way to saving or patrolling on water. Its strong light can tell victim that vehicle is coming and warn the surface vehicles.
Active harmonic filter is connected in parallel with non-linear loads, and uses one set of CT to detect the load current. It calculates each order harmonic current by FFT algorithms in its DSP microchips, and then generates a compensating current with the same amplitude but opposite phase angles to the detected harmonic current, which cancels out the original load harmonics.Not only eliminates harmonic current from the load side, but it also mitigates harmonic voltage caused by harmonic currents. The AHF system can also improve power factor (PF) and correct load imbalances in the power system.
Water Rescue Robot R2 is the standard rescue equipment suitable for government emergency, private aid groups, and SAR organizations. It's applicable to swimming pool, reservoir, river, beach, and yachts and ferries rescue management. It supports remote controlled operation, intelligent double-sided use, auto modes switching, and throw from 20-meter-high-altitude places. It's also optional that it can cooperate with drone to become air-sea rescue system that extends its control range up to 5 kilometers.
>Swipe speed:<200 milliseconds>Wiegand output: 26 bits/34 bits>Software version: V7.107 or above>Hardware driver: V8.92 or above>Output power: DC12v 10OomA (power supply lock and card reader)
Emerson DeltaV KJ4001X1-NB1 Dual Left Extender Fisher-Rosemount 12P3368X012 100% Brand New. 365 days warranty.
> Material: ABS> Frequency LF: 125/250/375/500/625/750/875/1000KHZHF: 13.56MHz ISO14443A> Battery: 3V 4pcs AAA> Dimension: 152x80x21mm
Spot UV creates a look and feel that’s different from the norm. We use a raised, clear polymer to make your text, logo and visuals stand out with a 3D, glossy shine. Which makes you stand out to customers.
RFID cable tag is made of PP material, optional with different colors like yellow/ green/ blue. RFID Cable tag can be used in water and harsh outdoor environment.
Designed for Input voltage 16.5-50Vdc work, output 125W max DC transient voltage protector, with features of Transient protection MIL-STD-1275 A/B/D and MIL-STD-704A/E/F and typical efficiency 98%.
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
