Ultra wide input 34-160V, 20W DC/DC Converters with features of 1in.×1in. small size and 3000Vdc high isolation
The waterproof led driver 60W is Class 2, Class P TYPE HL standard. Has the protection of short circuit/over voltage/over heat. 100-277VAC for worldwide using. Klus design led strips can work well with that.
Variable optical attenuators,short as VOA, are used to permit dynamic control of optical power levels in a fiber. It can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter. Furthermore, they can the used in optical amplifier systems to balance the gain across the different operating wavelengths.
Mode conditioning patch cords are required when Gigabit 1000BASE-LX routers and switches are installed into existing multimode cable plants. They are used to adapt the singlemode output of Gigabit Ethernet (1000BASE-LX) transceivers to a multimode cable network. All SZOPT’s mode-conditioning patch cords are fully compliant with IEEE 802.3z application standards.
This UHF RFID cable tie usually made of nylon,the head of the tie can be customized by function,and the IC chip is inside.The length of wrist can be adjustable,once attached can not be open without cuting off.The chip types can be Alien Higgs-3 or Impinj Monza R6P,so this tag has a long reading distance, which is perfectly suitable for large warehouse management.
ZDDQ SVG/STATCOM is a modular system from 6kv to35kv, supplies reactive power to distribution grids with high regulating dynamics, and carries out regulating tasks such as voltage regulation or influencing the flow of reactive power.
Ntag213 Card can print the image as you want, as well as used directly without printing. RFID Ntag213 card commonly used to make a payment card, membership card, bus card, parking card, access control card, ticketing, etc. Ntag213 NFC card is a full-featured NFC card with small-size memory capacity, can be read and written 10,000 times, and is compatible and programmable with all NFC-enabled smartphones and devices.
Improve efficiency and productivity with our RFID readers. Explore now. Meihe RFID readers are designed specifically for your enterprise and environment. Best Encoding Accuracy. Industrial durability. Operational Efficiency. User-friendly features. Types: Retail, Healthcare.
Features Low voltage operation Low phase noise Prevention of moisture packing is unnecessary Moisture sensitivity level: LEVEL 1 (IPC/ JEDC J-STD-033) Applications Mobile phone (W-CDMA, CDMA2000, TD-SCDMA, GSM, GPRS, Mobile W-PHS) Other wireless radio communications GPS Industrial radio communications Wearable decices
1. Colorful ticket dispenser can be choose 2. can print logo on counter ticket dispenser 3. deli number dispenser support 2 digis and 3 digits paper roll
The tag is flexible and can be stuck on metallic assets easily, specially for irregular and uneven surface, such as steel boiler, metal container, steel pipe, etc. It has good performance on metal and can be printed with logo, numbers, text by RFID printers, such as Zebra ZT410 Silverline,Sato CL4NX,Toshiba SX-5,Postek TX3r,etc.Synchronous encoding is also available.
This tag also called E-Seal tag,is a high security bolt seal,designed fo r ISO container cargo shipments with RFID antenna built in, iusually s used in areas where long-range reading,anti-collision,multi-data reading,high speed identification and unique authentication ID functions are required.With the RFID tachnology,this E-seal tag can monitor for tampering to ensure the integrity of container shipped around the world.Can be delivered pre-printed with customer logo, barcode and human readable serial number (laser engraved).Pre-programming and personalisation services for E- Seal fully supported.
6.5W flexible solar panel chargers are ideal for charging your mobile phone while climbing
Original New ABB PM860AK01 3BSE066495R1 Processor Unit CPU Module
RFID NTAG216 NFC Chip Card's EEPROM: –924 bytes, organized in 231 pages of 4 byte per page. –26 bytes reserved for manufacturer and configuration data –37 bits used for the read-only locking mechanism –4 bytes available as capability container –888 bytes user programmable read/write memory Can be rewritten URL, text, number into RFID NFC Cards by NFC Card Programmer, 13.56Mhz and ISO/IEC14443 Type A ISO standard, protocol.It widely used for payment, identify, date exchange, information share. Usually we see on RFID NFC market like Transparent NFC Business Cards, NFC Payment Card etc.
RFID Smart Ring intelligence built into the dual MCU NXP chip, to simulate and replication of various frequencies of non-contact IC, ID chip, which can be used instead of the rfid cards and rfid keyfobs.
Transparent RFID NFC Business Card is also called clear business name card, which using special transparent plastic pvc as material, CMYK offset printing on one side for full clear, added something special crafts on card surface, such as hotstamping(silver/gold/laser hologram foil etc), silver/gold background, smart chip or as your need.
CWDM MUX DEMUX,Multiplexing up to 8 Channels on Fiber Pair Passive, Protocol Transparent for Ethernet, FC, OTN, SONET/SDH, etc. Fully Compatible with All ITU-T 1G/10G/25G CWDM Optics Applied to Metro, Regional CWDM Networks
Energy saving factory price UV LED Curing System with desktop conveyor for printing. Effective irradiated area: 30mm*200mmTotall size: 1500x300mm and 1200x400mm
These cameras check all the boxes successful hunters want the most. The highest picture resolution with a 4K Single Sensor for best in class image and video quality, plus optimized battery life for maximum image captures and more time in the field without checking batteries. All in a compact design to stay hidden from eyes you don't want to alert animal and human.