The CH-L0101 loop controller is independently developed by our company. Aimed for industry lighting for warehouse and factory, buildings,stations, and the smart tunnel lighting control system, etc., to control the power supply of lighting fixtures through a human-machine interface, to collect data and monitor the status of the power supply loop. The most advantaged for the Loop Dimming System is to save lot of individual lamp controller on every lighting fixtures, just adjust all of the lamps' brightness by the Centralized Controlling Power Supply Box, the distribution cabinent can also linkage with the Motion Sensor or illuminance sensor to warranty the most effectitve power saving management.

We Colshine have more than 20models of waterproof porcelain lights with glass lampshade, in E27, E14 & G9 for option. These products up to IP54 or IP44, are widely used as wall lamp, ceiling lamp and sauna lamp.

Our plastic key tag combo cards can be fully customized with your crafts, such barcode , text, and numbering ,signature panel or scratch off. And shape and size as well . We use the 100% full new friendly PVC materials, and your barcode will be fully protected under a high gloss laminate.

Active Power filter(APF) is connected in parallel with non-linear loads, and uses one set of CT to detect the load current. It calculates each order harmonic current by FFT algorithms in its DSP microchips, and then generates a compensating current with the same amplitude but opposite phase angles to the detected harmonic current, which cancels out the original load harmonics.Not only eliminates harmonic current from the load side, but it also mitigates harmonic voltage caused by harmonic currents. The AHF system can also improve power factor (PF) and correct load imbalances in the power system.

SIMATIC S7-300 CPU 317-2 PN/DP

The RTD probe is composed of an element,sheath,lead wire and connector, it is working principle is the resistance of a metal changes with temperature.An electrical current is transmitted through the RTD element located in proximity to the area where temperature is to be measured, the resistance value is then measured by an instrument.

This modern LED medicine cabinet comes with 2 sides mirror door, 2 adjustable tempered glass shelves and shaver socket, a must have when applying make up or shaving. The illuminated cabinet is more convenient than traditional ones, cutting off installation of vanity light fixtures. As a typical design of single door bathroom medicine cabinets with lights, it provides a stunning effect as well as functional storage.

IL<2.4dB , 100GHZ DWDM MUX DEMUX Monitor Port for Troubleshooting, 1310nm Port for Legacy Traffic Multiplexing of 8 Channels over a Dark Fiber Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks

13.56MHz ISO15693 ICODE SLIX NFC Keyfob is made of ABS material with rfid chip and antenna . It will be durable and injection ABS case then sealing rfid chip under ultrasonic machine without any space sideview so that you can use them in out-door harsh environment and waterproof .It will fully compliance with ISO15693 and 13.56Mhz NXP ICODE®SLIX chipset , an intelligent anticollision function enables several keyfobs to operate in the field simultaneourly.The anticollision algorithm selects each keyfob individually and ensures that the execution of a transaction with a selected keyfob is performed correctly without data corruption resulting from other keyfobs in the field .This kind of rfid chip keyfob widely uses for libraries .pharmaceutical supply chains and door control access, etc .It also is fully compatible with NFC forum type 5 under nowadays more and more popular NFC applications .

high stability led driver ; 12v 96w dimmable LED waterproof power supply ; triac dimmable led light driver

If you are looking for a weatherproof 150w 24v led driver, this driver just satisfy your demand and won't let you down. please noted that 80% load for driver is better to extend its life service. AQ lighting led strips are compatible with that.

350mA 42w triac dimmable LED driver ; constant current led driver ; 350mA triac dimmable LED power supply

This is a low power led driver which is 24 volt 12 watt single output triac dimmable drver for Sunlite led light. It has got SAA,CE,ROHS approval, 5 years warranty.

3.2inch 240x320Res with touch controller PCB board resistance touch panel

Emerson DeltaV KJ3204X1-BA1 VE4002S1T2B5 DIGITAL OUTPUT MODULE 12P3275X022 100% Brand New. 365 days warranty.

Most Effective Energy Saving Warehouse & factory lighting manangement need the Dynamic Lighting System to control and monitor whole projects.The system consists of control subsystem, monitoring subsystem, powing consumption analysis subsystem, Expert Statistics subsystem and Asset Managing subsystem. They will provide the owner most proffesional solutions with an economic, safety, higher quality, and environment friendly bill saving , to achieve the on-demand lighting goal. Maximum of 90% power saving on this flexiable Energy Saving & Safer,smart bundle system. Greatly cut off the energy consumption and decreased the lighting maintenance cost and time by amazing Motion Sensor, illuminance sensors.

Fiber Optical Patch Cord SMA-SMA has SMA connectors on both ends,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom.Simplex or Duplex is available.

RFID NTAG216 NFC Chip Card's EEPROM: –924 bytes, organized in 231 pages of 4 byte per page. –26 bytes reserved for manufacturer and configuration data –37 bits used for the read-only locking mechanism –4 bytes available as capability container –888 bytes user programmable read/write memory Can be rewritten URL, text, number into RFID NFC Cards by NFC Card Programmer, 13.56Mhz and ISO/IEC14443 Type A ISO standard, protocol.It widely used for payment, identify, date exchange, information share. Usually we see on RFID NFC market like Transparent NFC Business Cards, NFC Payment Card etc.

Features Ceramic Seam-Welded Package Excellent Reliability Ultra Miniature Package Suitable for Surface Mount Technology and IR Reflow Process For application in wireless communications system Applications Pager, Cordless Phone, GPS, FRS, Cable Modem, RKE, ISM, GSM, EGSM, DCS, PCS, CDMA, W_CDMA, SONET, Wireless Microphone, Industry Remote Control

The 1756-EN2TR is an Allen-Bradley communication module that support Ethernet I/P communication protocol. This module has Two (2) RJ45 port for connecting or implementing Redundant Ethernet network. It also has a USB 1.1 port.