A fiber optic HDMI cable is a cable using optical fiber as the transmission medium,the principle of the cable is to integrate the photoelectric conversion line at the hdmi interface and use the fiber optic as the transmission medium material; during the transmission process, the hdmi optical fiber transmitting end converts the hdmi signal into an optical signal and transmits it to the hdmi fiber optic through the optical fiber medium line receiving end, the receiving end then converts the optical signal into a lossless hdmi signal and outputs it to the display device.

High Frequence RFID Blank Cards With MF 1K Chip is made by MF1 IC S50 chip, usually referred to as S50 card or MF 1K. Could provide white card, printing card, paper stickers labels, key fobs, Token Cards, and a variety of thin card and thick card. Main applications: access control, identification, logistics, industrial automation, all kinds of membership cards, such as Shoufan, subway, bus token cards, clubs and other electronic consumer, and so on.

Designed for applications in the data center,networking and telecommunications markets that requires a high speed,reliable cable assembly,this next generation product shares the same mating interface with QSFP+ form factor ,making it backward compatible with existing QSFP ports.QSFP28 can be used with current 10G and 14G applications with substantial signal integrity margin.

Power quality conditioner (Active harmonic filter/AHF) is connected in parallel with non-linear loads, and uses one set of CT to detect the load current. It calculates each order harmonic current by FFT algorithms in its DSP microchips, and then generates a compensating current with the same amplitude but opposite phase angles to the detected harmonic current, which cancels out the original load harmonics.Not only eliminates harmonic current from the load side, but it also mitigates harmonic voltage caused by harmonic currents. The AHF system can also improve power factor (PF) and correct load imbalances in the power system.

ZDDQ Power Factor Compensation Panels improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Low voltage metal enclosed capacitor and filter banks,equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by power factor improvement and harmonics filtering.

UHF Flexible On Metal Tag is suitable for metal and liquid-filled container management.it is is self adhesive,so it can be stuck on metallic assets easily.It has good proformance on metal and can be printed with LOGO,numbers etc.Widely used in metal asset tracking,Inventory tracking purposes and many other industry verticals.The label could also be printed and encoded via RFID printer.

35KV APFC panel (automatic power factor correction)/group reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

1. New ultra-bright and energy-saving smart LED display; Brightness≤10000cd/㎡; Average power consumption ≤ 150W/㎡; 2. Low framework cost: Fully enclosed module+bracket=large screen, saving the cabinet and framework cost; 3. 640 * 320mm large module, good flatness; users can quickly assemble signs of different sizes; 4. Low transportation cost; Light-weighted module; ≤ 25KG/㎡, small volume and light-weighted, saving storage and transportation costs; 5. Wall mounted design, module, power supply and the control system can be maintained from front and rear, easy for maintenance; 6. Fast installation: Fast lock installation, two in one signal and power cable with fast connection, labor saving, beautiful cabling; 7. Low noise: no fan is designed to ensure the noise less than 25 decibels. 8. High protection level: IP65 front and rear, 9. It is specially designed to provide an overall solution for high-end displays such as outdoor commercial advertisements, road advertisements, door head advertisements and window advertisements.

This UHF RFID Long Range Reader operates with the chip of Impinj R2000, which achieve high speed and rapid date processing operations. It can quickly read tags from a long distance about 30m.Mainly used for vehicle inspection,outdoor patrolling vehicles, vehicle tracking, industrial production process control, logistic, inventory management, etc.

Smarts' SMT-012-300VTH IS 300W Triac dimmable 100-277VAC constant voltage LED driver + PWM signal output.it'scompliance to worldwide safety regulations for lightings,compatible with Forward phase, Reverse phase, Triac, MLV, ELV Lutron Dimmers 220v with 7 years warranty.

Medium voltage automatic power factor correction/ capacitive Var Coompensator systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

ultra thin led driver outdoor ip66 12v 24v 36v 100w slim for Hampton Bay's led ceiling light, for led strip lights, for moving sign applications, for LED display. 331*32*23mm dimension, 0.55kgs weight smaller and lighter than the led drivers on the markets.

MANGO proximity card, 125khz proximity cards, 125khz Mango card

AC to DC 24V 18W Constant voltage LED power supply

RFID NTAG216 NFC Chip Card's EEPROM: –924 bytes, organized in 231 pages of 4 byte per page. –26 bytes reserved for manufacturer and configuration data –37 bits used for the read-only locking mechanism –4 bytes available as capability container –888 bytes user programmable read/write memory Can be rewritten URL, text, number into RFID NFC Cards by NFC Card Programmer, 13.56Mhz and ISO/IEC14443 Type A ISO standard, protocol.It widely used for payment, identify, date exchange, information share. Usually we see on RFID NFC market like Transparent NFC Business Cards, NFC Payment Card etc.

China Outdoor Led Flood Light Sports Baseball Filed Lighting Factory offer Low Price Mean Well&Philip Led Chip with 5 Years Warranty OEM&ODM Kinds of Led Flood Light Specially For You Professional Engineers Make the Dialux for Your Projects

ABB BRC410 Symphony Plus Bridge Controller BRC-410 SPBRC410 SPBRC41000000

rfid disk tag 25mm, programmable rfid tag, Waterproof coin tag

> Card type: EM Card> Metal case, anti-vandal> Waterproof conforms to IP66> One relay, 2000 users, standalone> Pulse mode, toggle mode> Built-in LDR for anti-tamper> Card block enrolment

> Card Type: MF Card> Material: Aluminum alloy> Waterproof Rate: Non-Waterproof> Dimension: 117 X 78 X 22mm