Battery free, Wireless Light Switch RF 433Hz Remote Control Switch ON/OFF 90-260V Lamp Light Wireless Wall Remote Switch Receiver Transmitter. I switch can control multi receiver and multi switch can control 1 receiver or multi receiver.
Elevator Access Control board for 20-40 floors, built-in TCP/IP with free software to manage users. Support RFID/Pincode/Face/Finger to access
> Voltage: AC/DC 12-36V> Relay output: N.O.-point output(relay)> Maximum switching voltage: 48V AC/DC> Maximum switching current: 0.5A AC/1.0A DC> The largest power switch: 55VA/24W
Easily encode and print UHF RFID wristbands for patients ( name, barcode, QR code or other details). Disposable, using PP synthesis paper, custom size and full printing.
Each diamond card is our masterpiece, this process using imported stones and sophisticated technology, with high quality and a high security effect.
SAA Slim size triac dimmable LED drivers comtabile well with most of brands of Triac/Phase-Cut dimmers (Brand: Lutron, Leviton,Clipsal, HDL, ABB, DALITEK )
SMT-B-12150-5C-A is bluetooth led driver 12v 150w with 5 channels, IP67 design for outdoor use, work well with ECOLOCITY RGB LED lights 12v.
Long distance UHF Soft Flexible Anti Anti-metal Label is the great ideal solution for curved and flat surfaces. Using IMPINJ Monza R6 chip, reading range up to 7m on metal sureface, printable, flexible, soft, thin, high temperature resistant.
NICHIA 6w Original Source UV Flashlight is made up with three-stage hard oxidation shell of aluminium alloy, inside Japan NVSU233A 5w 365nm UV LED. It's special in detecting amber, jade, cioin,etc..
SMT-012-080VTH /12V 80W dimmable led power supply a universal AC input range of 100-277V,ouput voltage 12vDC and has a maximum load of 80W. This dimmable 12v led power supply has short circuit/overload/over voltage/over temp protection. Class P, Type HL standard.SMARTS's dimming 80W LED Driver can directly replace the original power supply of SANSI LED's 80W LED floodlight.
constant voltage working mode, rated Input Voltage:110-277VAC, Output Power:30W,36W, Body: aluminum Body with Protection Grade IP67, for indoor dry or damp environment installations.The waterproof 36W led driver with klusdesign's LED strip 30W can make the lamp run normally in a quiet environment.
ABB 3BHB006943R0001 UNS0885A-Z V1 Converter Disp sales6@askplc.com
> Card type: EM Card> Material: Plastic Case> Dimension: 110x45x28mm
MDSC/MDRC38 Series Digital to Synchro Converters or Digital to Resolver Converters are the converter that converts the input binary signal into sin and cos signal output. Input signal is compatible with DTL/TTL/CMOS level, the output signal is orthogonal sin and cos signal which can directly drive isolation transformer or SCOTT transformer, then, is converted into arbitrary value of resolver or synchro signal. This series of product continuously tracks the input 12-bit/14-bit/16-bit binary data, and outputs high-precision synchro/resolver signal after conversion, it has higher conversion accuracy and latch function. The product is equipped with power amplification circuit inside it, and its output power can reach 1.3W.
LED matrix moving head light.It uses 64x3W Amber LEDs and 3° beam angle lens,And can also work infinite rotation at Pan / tilt .64pcs of LEDs are individually controlled in DMX and Artnet control mode.
Dimmable Sensor LED Driver Remote Contol Microwave Movement Senor
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
