SVG STATCOM system is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.

Medium voltage auto power factor correction capacitor panel are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

SVG dynamic reactive power compensation(DRPC) is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.

6.6kv Stepless reactive compensator statcom statcon is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

ZDDQ low voltage APFC capacitor panels improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by improving power factor and harmonics filtering.

IGBT controled power factor correction panel based on Static var generator SVG is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.

ZDDQ Low voltage automatic power factor correction panels improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by improveing power factor and harmoncis filtering.

Active harmonic filter(AHF) is connected in parallel with non-linear loads, and uses one set of CT to detect the load current. It calculates each order harmonic current by FFT algorithms in its DSP microchips, and then generates a compensating current with the same amplitude but opposite phase angles to the detected harmonic current, which cancels out the original load harmonics.Not only eliminates harmonic current from the load side, but it also mitigates harmonic voltage caused by harmonic currents. The AHF system can also improve power factor (PF) and correct load imbalances in the power system.

Static Var Generator SVG is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.

Active harmonic filter is connected in parallel with non-linear loads, and uses one set of CT to detect the load current. It calculates each order harmonic current by FFT algorithms in its DSP microchips, and then generates a compensating current with the same amplitude but opposite phase angles to the detected harmonic current, which cancels out the original load harmonics.Not only eliminates harmonic current from the load side, but it also mitigates harmonic voltage caused by harmonic currents. The AHF system can also improve power factor (PF) and correct load imbalances in the power system.

A STATCOM (Static Synchronous Compensator,Dstatcom) is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

The Advanced Static Var Generator provides the same dynamic performance as the SVG with the added benefit of combining harmonic mitigation. Available in 50/100kVar wall mount and 30/50/100kVar cabinet mount modules, 400/480/690VAC three phase.

ZDDQ Low voltage electrical power factor corrector improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by improving power factor and harmonics filtering.

ZDDQ low voltage automatic capacitor banks and Harmonic Filters improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring.

A Static Synchronous Compensator(STATCOM) is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

Medium voltage outdoor Static Synchronous Compensator(STATCOM) is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

High voltage automatic power factor correction/reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

Static var generator/SVG/STATCOM is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.

Medium voltage automatic power factor correction/reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

Medium Voltage filter capacitor (FC) banks are widely used to limit harmonic propagation, to improve power quality, to reduce harmonic distortion, and to provide reactive power compensation. These are designed for high‐current and high‐voltage applications. Many such filters are in operation for HVDC transmission systems, large industrial drives, static VAR compensators, and so on.