Sales

Dimming Daylight Harvesting Less Than 30mA DC Motion Sensor

Product Detail

Dimming Function Daylight Havesting Less Than 30mA DC Motion Sensor

Features of Sensor:

1. Daylight Harvesting

2. Automatic ON/OFF control Of dalight sensor.

3. Optional detection range, holdtime,daylight threshold, Stand-by period and Stand-by dimming level.

4. Remote control.

5. 5 years warranty.

Daylight harvesting of dc sensor:

	Daylight Harvesting: When ambient lux value is lower than preset lux value(30Lux, 50Lux, 80Lux or 120Lux), light on when detect movement and adjust artificial lighting to keep the brightness balancing; When ambient brightness is higher than preset lux value, lamp will still remain off even no movement detected.
	Precondition of Daylight Harvesting: as picture 1. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux. 2. Hold time is on 5s/30s/1min/3min/5min/10min/20min/30min

When ambient lux value is lower than preset lux value(30Lux, 50Lux, 80Lux or 120Lux),

light on when detect movement and adjust artificial lighting to keep the brightness

balancing; When ambient brightness is higher than preset lux value, light off.

When ambient brightness is higher than preset lux level, light will automatically turn off.

Technical date of dc motion sensor:

Operating voltage	10-15VDC
Detection area	25%/50%/75%/100%
Operating current	＜30mA
Output	DIM 0-10V
Stand-by power	<0.5W
Hold time	5s/30s/1min/3min/5min/10min/20min/30min
Daylight threshold	2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
Stand-by period	0s/10s/30s/1min/5min/10min/30min/+∞
Stand-by dimming level	10%/20%/30%/50%
Operating termperature	-20°C~+60°C

Application of DC motion sensor:

1. Automatically ON/OFF function:

The Stand-by period is set to "0s",

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.

	With sufficient daylight,even when motion detected,light remains OFF.
	With insufficient daylight,when motion detected, light ON.
	After the last detection and the present hold time elapsed, light OFF.

2. No daylight function

The daylight threshold is set to "Disable".

Light on when detect movement, After people leave, Light off after stand-by period.

Applications: Dim places such as Basement Parking, Underpass.

	When motion is detected,the sensor will switch on thelight to 100% brighteness.
	After people leave the detection area, light remains 100% brightness within hold time.
	After the last detection and the present hold time elapsed, light OFF.

3. Function Demo - Dimmable control/Corridor function

	With sufficient daylight,even when motion detected,light remains OFF.
	With insufficient daylight,when motion detected, light ON.
	After last detection,After last detection,down to the stand-by dimming level(10%,30%) after holdtime.
	After the stand-by period,light OFF.

Pattern of DC motion sensor:

	Pin setting +12v,GND,DIM+
	Mounting height,less than 15m/49.2ft (ceiling mounted) Detection range,Max,ø14m/45.92ft (ceiling mounted) Detection angle,30°-150° (without glass)
	The sensor size is (LWH)3433.511mm
	Antenna module:Emit microwave signal,sense the motion of the object Daylight sensor:Inducts the external light sensitivity threshold, controls the lamp switch