CYQ Series Hydrogen Peroxide Transfer Pump

CYQ pumps have the following design features.

• Magnetic coupling drive, dynamic seal is changed to static seal, and the medium will not leak during operation.
• Closed impeller design, high efficiency.
• All flow-through parts are made of fluoroplastics, suitable for conveying corrosive fluids such as acids, alkalis, and salts of different concentrations.
• The inner and outer magnetic steels are made of rare earth magnetic steel, with strong magnetic torque and no demagnetization.
• Adopting molded fluorine lining technology, the thickness of the fluorine lining layer is 8-15mm, corrosion-resistant and will not fall off.

CYQ Series Hydrogen Peroxide Transfer Pump Precautions for use:

• The magnetic pump should be installed horizontally, not vertically. The pump body should not bear the weight of the pipeline. For special occasions where vertical installation is required, the motor must face upward.
• When the suction liquid level is higher than the pump axis, open the suction pipe valve before starting. If the suction liquid level is lower than the pump axis, the pipeline needs to be equipped with a bottom valve.
• The pump should be checked before use. The motor fan blades should rotate flexibly, without jamming and abnormal sounds, and all fasteners should be tightened.
• Check whether the motor rotation direction is consistent with the magnetic pump steering mark.
• After the motor starts, slowly open the discharge valve. After the pump enters the normal working state, adjust the discharge valve to the required opening.
• Before the pump stops working, the discharge valve should be closed first, and then the power supply should be cut off.

We can according to actual working condition, choose different configuration, provide an accurate solution. Technical consulting, please contact us!