Metal spacer is used on slitter shaft to adjust different distance between slitting knifes according to needed width of coiling strips, which should be the same as precision as knife. resonable prices, wear resistance, but lighter for ensuring high precision of slitting strip and easier assembling operations. Well used materials of metal spaces: 40Cr, S45,65Mn,9CrSi,GCr15,and stainless steel.

Basic size Diameter: 200-700mm Thickness: 20-100mm Material: 55SiCr, 9CrSi,SKD11,LD,HSS,HSS insert To get a quote or more details sooner about this top shredder knife, please email us at phoebe@lcblade.com OR whatsapp +86 13399550005 Teeth shredder blades are uesd for double or four shafts shredders. And you could easily find the right shreddering blades here for shreddering livestock, vegetables, papers, textile fabrics, clothes, woods, plastic, rubber, tires, oil cans, steel and so on wastes. 1. Superior choice of material for different wastes; 2. High precision & strict inspection; 3. Advanced & experienced heat treatment for a good hardness 4. Wear resistant & long working life 5. OEM & small MOQ is available

Metal slitter knife of Licheng is used to slit hot and cold mild steel, stainless steel, Al, Co, galvanized sheet, silicon steel, and so on coiling strips. We have manufacturing capability of production slitting knife size up to 680mm at OD with material Cr12MoV, D2, W6Mo5Cr4V2, W18Cr4V, H13, H13K, H13Ni, HMB, LD, and special customized materials (for high tensile steel sheet, oriented and non-oriented silicon steel slitting). Slitter knifes from Licheng is always highly required with 1. Wear resistance & high pricesion 2. Advanced heat treatment 3. Superior choice of raw material and hardness of knife according to clients' products 4. Strict inspection & best service

Dished Knife should be assembled with a suitable knife holder installed in shaft of rewinding machine, working together with bottom knife on another shaft to slit rolled products like paper, film, tape, fabrics and so on into smaller rolls. Simply Detailed Parameters : 1. Basic size (ODxIDxT) : 90x65x1.2mm 2. Material: SKD11 3. Hardness: 58-59HRC 4. Dished angle: 5 degrees. To get a quote or more details sooner about this top slitter knife, please email us at phoebe@lcblade.com OR whatsapp +86 13399550005

610mm log saw blade is for living paper cutting,we could supply you all the basic size: 610mm,810mm,870mm,1000mm, 1200mm and customized type is available. Details: Basic size: 610x68.3x3.8mm/610X68.3X4.76mm Material: Cr12MoV, D2 Hardness: 58-62HRC Roughness of surface: Ra0.2-Ra0.8

1.The blade is made of high quality tungsten carbide. They are very sharp and easy to cut most materials 2.It is very sharp and easy to cut almost any surface due to triple cutting edge technology. 3.The blade is heat-treated with HRC 90, with high strength and provide a longer service life.

Metal slitter knife of Licheng is used to slit hot and cold mild steel, stainless steel, Al, Co, galvanized sheet, silicon steel, and so on coiling strips. We have manufacturing capability of production slitting knife size up to 680mm at OD with material Cr12MoV, D2, W6Mo5Cr4V2, W18Cr4V, H13, H13K, H13Ni, HMB, LD, and special customized materials (for high tensile steel sheet, oriented and non-oriented silicon steel slitting). Slitter knifes from Licheng is always highly required with 1. Wear resistance & high pricesion 2. Advanced heat treatment 3. Superior choice of raw material and hardness of knife according to clients' products 4. Strict inspection & best service

A whole set of knife of a slotter machine consitsts mostly of slot knife, bottom knife, spacer, and valve knife. Slotter knife is also called "Sector knife" by manufacturers due to its curved shape. The function of slotter knife is obviously slot, slotting folding parts of corrugated cardboard by the teeth which coud be serrated or crescent-shaped. Details: Basic size: Angle of sector x (R-r) x T Material: GCr15, 9SiCr, SKD11, LD, HSS Hardnss: 57-64HRC Teeth type: Serrated or crescent-shaped Roughness of surface: Ra0.2-Ra0.8

Detailed parameters: 1. Basic size (ODxIDxT) : 200x25.4x2.5mm 2. Material: TCT 3. Hardness: 92-96HRA 4. Bevel & Angle: two bevels on two faces To get a quote or more details sooner about this circular slitter knife, please email us at phoebe@lcblade.com OR whatsapp +86 13399550005 Circular cutting & slitting knifes from Licheng Blade Manufatory is always popular with clients worldwidely. are mainly used in rolls cutters, slitters and rewinders. You can easily find right slitter and cutter knifes here for foil, film, tape, rubber, fabric, paper, label, cardboard and so on rolling products cutting & slitting. Knifes from Licheng Blade Manufatory is always popular to clients worldwidely due to 1. Superior choice of material of knife for different products to meet diffrent requirements from clients; 2. Advanced and experienced heat treatment to ensure a good hardness of knifes; 3. Excellent precision and strict inspection to make products and quality effecient and stable; 4. Large production capability, abundant stock, available customization to provide a best service & solution of knifes supplying.

Metal spacer is used on slitter shaft to adjust different distance between slitting knife according to needed width of coiling strips. Same high pricision as slitting knife's; Reasonable price, not as expensive as knife of raw material; Wear resistance, but lighter for machine shaft to ensure higher precision of slitting strip and easier assembling.

A whole set of knife of a slotter machine consitsts mostly of slot knife, bottom knife, spacer, and valve knife. Slotter knife is also called "Sector knife" by manufacturers due to its curved shape. The function of slotter knife is obviously slot, slotting folding parts of corrugated cardboard by the teeth which coud be serrated or crescent-shaped. Deatils: Basic size: Angle of sector x (R-r) x T Material: GCr15, 9SiCr, SKD11, LD, HSS Hardnss: 57-64HRC Teeth type: Serrated or crescent-shaped Roughness of surface: Ra0.2-Ra0.8

Metal spacer is used on slitter shaft to adjust different distance between slitting knifes according to needed width of coiling strips, which should be the same as precision as knife. resonable prices, wear resistance, but lighter for ensuring high precision of slitting strip and easier assembling operations. Well used materials of metal spaces: 40Cr, S45,65Mn,9CrSi,GCr15,and stainless steel.

1. High grinding efficiency; Much longer life of the wheel. 2. Good self-sharpening, lower grinding temperature; less blocking, less surface burn of a workpiece. 3. Grinding wheel has a certain elasticity, improving the surface roughness, used for grinding, semi-finish grinding, polishing, and another process 4. A diamond grinding wheel is shorter production cycle time; higher removal rate. Easily to make complex wheels. 5. The company has professional technology and equipment, easier to form a variety of complex surface resin diamond grinding wheel

Metal spacer is used on slitter shaft to adjust different distance between slitting knife according to needed width of coiling strips. Same high pricision as slitting knife's; Reasonable price, not as expensive as knife of raw material; Wear resistance, but lighter for machine shaft to ensure higher precision of slitting strip and easier assembling. Details: Material of separator 9CrSi / 52100/ SKD11 Thickness tolerance ±0.00008" Hardness 45-56HRC outside diameter tolerance ±0.001" parallelism within 0.0001" flatness within 0.0001" concentricity within 0.001" max surface roughness Ra0.2

Metal spacer is used on slitter shaft to adjust different distance between slitting knife according to needed width of coiling strips. Same high pricision as slitting knife's; Reasonable price, not as expensive as knifes; Wear resistance, but lighter for machine shaft to ensure higher precision of slitting strip and easier assembling. Detailed parameters: 1. Basic size (ODxIDxTmm): 140x100xT 2. Material: 65Mn 3. Hardness: 48-58HRC 4. Tolerance of Thickness: +/-0.002mm 5. Burr-free 6. Roughness: Ra0.2/ Ra.04

A whole set of knife of a slotter machine consitsts mostly of slot knife, bottom knife, spacer, and valve knife. Slotter knife is also called "Sector knife" by manufacturers due to its curved shape. The function of slotter knife is obviously slot, slotting folding parts of corrugated cardboard by the teeth which coud be serrated or crescent-shaped. Details: Basic size: Angle of sector x (R-r) x T Material: GCr15, 9SiCr, SKD11, LD, HSS Hardnss: 57-64HRC Teeth type: Serrated or crescent-shaped Roughness of surface: Ra0.2-Ra0.8

Metal spacer is used on slitter shaft to adjust different distance between slitting knifes according to needed width of coiling strips, which should be the same as precision as knife. resonable prices, wear resistance, but lighter for ensuring high precision of slitting strip and easier assembling operations. Well used materials of metal spaces: 40Cr, S45,65Mn,9CrSi,GCr15,and stainless steel.

Teeth Knife is mainly used in packing machines. Straight teeth cutting knife; Guillotine knife; Circular teeth knife; Zigzag knife; Counter knife; Punching knife; Perforation knife; Scraping knife and so on packaging industrial knifes You will find the right blades here for cutting conjoined bags, packaging film, packaging bags, food bags, food, vegetables, papers, textile fabrics, etc. 1. Minimum cutting resistance 2. Notch sharpness 3. Surface smooth 4. Precise and durable Details parameters of picture teeth knife: 300-25-1.5mm; Single teeth

A whole set of knife of a slotter machine consitsts mostly of slot knife, bottom knife, spacer, and valve knife. Slotter knife is also called "Sector knife" by manufacturers due to its curved shape. The function of slotter knife is obviously slot, slotting folding parts of corrugated cardboard by the teeth which coud be serrated or crescent-shaped. Details: Basic size: Angle of sector x (R-r) x T Material: GCr15, 9SiCr, SKD11, LD, HSS Hardnss: 57-64HRC Teeth type: Serrated or crescent-shaped Roughness of surface: Ra0.2-Ra0.8

A whole set of knife of a slotter machine consitsts mostly of slot knife, bottom knife, spacer, and valve knife. Slotter knife is also called "Sector knife" by manufacturers due to its curved shape. The function of slotter knife is obviously slot, slotting folding parts of corrugated cardboard by the teeth which coud be serrated or crescent-shaped. Details: Basic size: Angle of sector x (R-r) x T Material: GCr15, 9SiCr, SKD11, LD, HSS Hardnss: 57-64HRC Teeth type: Serrated or crescent-shaped Roughness of surface: Ra0.2-Ra0.8