CQB Series Heavy Duty Stainless Steel Magnetic Pump 

CQB pumps have the following design features:

• The flow-through parts of CQB magnetic pump are all made of stainless steel, which is suitable for conveying corrosive fluids.
• All stainless steel castings are processed by silica sol pickling process, the pump body has no sand holes and does not leak.
• Closed impeller design, smooth surface and high efficiency.
• The pump body has a foot, which complies with API685 standard design, and the pump body can withstand the pressure of the pipeline.
• Internal and external magnetic steel materials can be selected from NdFeB or SmCo.

CQB Series Heavy Duty Stainless Steel Magnetic Pumps Precautions For Use:

• Because the cooling and lubrication of the magnetic pump bearings depend on the medium being transported, it is absolutely forbidden to run idly, and avoid no-load operation when restarting after a power outage in the middle of work.
• If the transported medium contains solid particles, a filter should be added to the inlet of the magnetic drive pump: if it contains ferromagnetic particles, a magnetic filter should be added.
• The ambient temperature of the magnetic drive pump should be less than 40℃ during use, and the motor temperature rise should not exceed 75℃.
• The medium transported by the magnetic drive pump and its temperature should be within the allowable range of the pump material. The operating temperature of the engineering plastic pump is <60℃, and the operating temperature of the metal pump is <100℃.
• The conveying suction pressure is not more than 0.2mpa, the maximum working pressure is 1.6mpa, the density is not more than 1600kg/m3, and the particle size is not more than 30 × 10-6m2/s. Liquids without hard particles and fibers.
• For the medium that is easy to precipitate and crystallize, the magnetic drive pump should be cleaned in time after use to drain the accumulated liquid in the pump.
• After the magnetic drive pump has been running for 100 hours, the bearings and end face moving rings should be disassembled and inspected for wear, and the wearing parts that are no longer suitable for use should be replaced.

We can according to actual working condition, choose different configuration, provide an accurate solution. Technical consulting, please contact us!