Fiber Optical Patch Cord FC-LC has SC & LC connectors,with PVC,LSZH,OFNP jacket in yellow(SM);orange(OM1/OM2),aqua(OM3), magenta(OM4),lime green(OM5) or custom,the cable diameter is 3.0mm,2.8mm,2.4mm,2.0mm,1.8mm,1.6mm,1.2mm,0.9mm,etc.

7.2V NI-MH replaceable and rechargeable walkie talkie battery for VX228 VX231 VX234 etc., which can made with 1200mAh capacity, this two way radio battery is the cost-effective one which can fit in lots of Vertex models and replace FNB-V106, FNB-V103Li, FNB-V104Li, FNB-V131Li, FNB-V132Li and other batteries.

CWDM MUX DEMUX,Multiplexing up to 8 Channels on Fiber Pair Passive, Protocol Transparent for Ethernet, FC, OTN, SONET/SDH, etc. Fully Compatible with All ITU-T 1G/10G/25G CWDM Optics Applied to Metro, Regional CWDM Networks

TOPSCOMM TC103 Prepayment Keypad is a customer interface unit(CIU) specifically designed to give the customer an easy and friendly interface unit for operating a Prepayment Meter. The major function of the CIU to enable the user to enter prepayment tokens for adding new credit and display of the consumer for energy efficiency purpose. The prepayment process utilizes STS prepayment token encryption.

Capacity: 1KVA-15KVA Inverter Features: N+X redundant parallel technology; AC&DC dual-loop input design; Relay+SCR compensation Description: XMI-HR SERIES is Intelligent AC output power supply with 48Vdc.

SZOPT’s 19” 1U/2U/3U/4U fiber optic patch panel are SC/FC/ST/LC port ,12/24/48/96/144/288 fibers with the cold rolled steel powder well coated,designed to fit standard 19” racks. These patch panels are ideal for high density LAN interconnect or cross-connect patching,providing a designated terminus for interrelated cabling deployments.

Fiber Adapters (Mating Sleeve Fiber Adapter or Standard Fiber Adapter or Bulkhead Type Fiber Adapter) also called fiber adaptors,are used to link optical cables or device. Usually they are female to female,or female to male. SZOPT’s fiber adapters are mainly with ceramic sleeves, but phosphor bronze sleeve is an option for some special requirement.

A fiber optic HDMI cable is a cable using optical fiber as the transmission medium,the principle of the cable is to integrate the photoelectric conversion line at the hdmi interface and use the fiber optic as the transmission medium material; during the transmission process, the hdmi optical fiber transmitting end converts the hdmi signal into an optical signal and transmits it to the hdmi fiber optic through the optical fiber medium line receiving end, the receiving end then converts the optical signal into a lossless hdmi signal and outputs it to the display device.

IL<2.4dB , 100GHZ DWDM MUX DEMUX Monitor Port for Troubleshooting, 1310nm Port for Legacy Traffic Multiplexing of 8 Channels over a Dark Fiber Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks

1000BASE-SX SFP 1310nm 2km DOM LC MMF Transceiver Module for MMF is designed for use in 100GBASE Ethernet and 4x28G OTN client interfaces throughput up to 2km over multimode fiber(MMF) using a wavelength of 1310nm via LC Duplex connectors. Taking BOX+FPC+PCBA separate design, it has great reliability, airtightness and heat dissipation performance. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in various applications, such as 100G Ethernet, 112G OTN OTU4, telecom, service provider applications and 5G wireless network.

1000BASE-EZX SFP 1550nm 120km DOM LC SMF Transceiver Module is designed for use in 100GBASE Ethernet and 4x28G OTN client interfaces throughput up to 120km over single mode fiber(SMF) using a wavelength of 1550nm via duplex LC connectors. Taking BOX+FPC+PCBA separate design, it has great reliability, airtightness and heat dissipation performance. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in various applications, such as 100G Ethernet, 112G OTN OTU4, telecom, service provider applications and 5G wireless network.

Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical power, avoid optical receiver distortion due to input optical power powerful. The fixed fiber optic attenuator can achieve the dual function of adapter and attenuators.

High dense space Ceramic ferrules connector Low insertion loss High return loss Excellent mechanical endurance High credibility and stability

ODF is the short term of Optical Distribution Frame, is a high-density, large-capacity design box with cold rolled steel sheet, reasonable distribution, easy to manage, install and operate.

Variable optical attenuators,short as VOA, are used to permit dynamic control of optical power levels in a fiber. It can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter. Furthermore, they can the used in optical amplifier systems to balance the gain across the different operating wavelengths.

Capacity: 1-3kVA Battery: 12V lead acid(not included) Product Introduction: EV portable inverter could supply a steady pure sine wave AC to various load on board, such as coffee machine, microwave, hairdryer or sensitive electronics. It could bring home comfort and convenience for your life or work on board, either motor home or utility vehicle.

Variable optical attenuators,short as VOA, are used to permit dynamic control of optical power levels in a fiber. It can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter. Furthermore, they can the used in optical amplifier systems to balance the gain across the different operating wavelengths.

Product Features Low insertion loss Low polarization dependent Compact size Available in both normally open and normally closed states Excellent reliability Product Application Power Management Receiver protective Channel Balance Instrumentation

IL<3.5dB , 100GHZ DWDM MUX DEMUX Multiplexing of 8 Channels over a Single Fiber Bidi Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks

5G & WiFi-6 Smart Router System (CPE), is based on brand-new embed platform, it can be satisfied with growing-up mobile connections requirements and provides the fast speed beyond your imagination.