Our portable power energy storage can be carried with you.Unlike traditional energy storage, it is smart, powerful, and innovative, safer, more durable, energy-saving and environmentally friendly.
-296-4617 Engine wiring harness cable Electric Supply for excavators
-Customized standard GPT automotive electric wire harness
Multiplexing of up to 9 channels for single fiber BIDI transmission Fully compatible with all ITU-T 1G/10G/25G CWDM optics Passive, transparent to Ethernet, FC, OTN, SONET/SDH and other protocols Applications in metro and regional CWDM networks
Custom made cable with standard RS232 for serial communication. It is connected with JAE connector IL-AG5-30S-D3C1 30 way to used for connecting coomputer and peripheral devices.
Finding wire harness cable assembly manufacturer? We are professional factory focusing on aftermarket OEM wire harness assembly. With ISO9001:2015 certificated and UL listed, we are ready to offer you the excellent quality anytime. Contact us, Get a quote!
High stability and reliability Flexible control mode High output power up to 23dBm Customizable output power and configuration Operating temp. -20~60°C
Available in 8, 12 and 24 fibers Custom capillary lengths to meet different installation situations Single-fiber connector interface available as simplex or duplex channel in both SC and LC High performance in IL and RL Precise sizing 100% internally tested Supports higher speed Ethernet and Fibre Channel applications (OM3, OM4 and SM fiber)
VGA HDB 15PIN TO 16PIN IDC Connector, wire to board wire harnesse connector.
KEHAN is a reliable wire harness manufacturer with ISO9001:2015 and UL approved in China, you can find the quality wire harness assembly with a wide range of terminals and connectors, like JST, Molex Amphenol, JAE, or other compatible.
Automotive 7 pin TYCO/TE/AMP connector pigtail. Custom connector wire harness for automotive, industrial equipment, commercial appliance.
Low insertion loss High channel isolation Low polarization dependent loss Excellent reliability and stability
Cover whole C-Band: carrie 40 or 80 chs Low noise figure:typical 5.0dB High flatness: typical 1dB Redundancy hot swap power module: 110/220VAC and 48VDC can plug Mix Provide upper computer software, query and set up optical amplifier equipment, use Ethernet network or serial port access. Perfect Network Interface:standard RJ45 industrial standard interface and SNMP.
100% brand new HDB 40 Pin Male/Female 2.54 IDC connector with gray flat ribbon cable for display. Or any other applications need 40-Pin male to female ribbon extension cable.
Custom made industrial outlet receptacle with wires to terminals. Please contact us and tell us more details about your design, then we can give you the right quotation.
Multiplexing of up to 8 channels on dual fiber Monitor port for troubleshooting, 1310nm port for legacy traffic Fully compatible with all ITU-T 1G/10G/25G CWDM optics Transparent to Ethernet, FC, OTN, SONET/SDH and other protocols Applications in metro, regional CWDM networks
KEHAN is a professional wire harness & cable assembly manufacturer from China. The custom made wire harnesses controlled by ISO9001:2015 quality system. Welcome to send us the drawing or picture as you needed!
IL<3.5dB , 100GHZ DWDM MUX DEMUX Good channel to channel uniformity The complete passive solution requires no power cabling and no configuration Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optical devices Multiplexing of 8 channels on a single fiber Supports metro, regional and long-haul DWDM networks
Custom Wire Harness with Molex 2510 3pin to waterproof XS-type circular connector for industrial application.
High Quality Blue Light Switch Snap-in Power Inlet, 10A, 250V/110V Fuse *2, with custom made wire harness #6 Ring Terminal and Wago 221 Connector.