Communication Electronics

  • Outdoor Waterproof Fiber Optical Distribution Box SMC

    PLC splitter distribution box series are applicable in FTTH project and suitable for building’s outer walls application; They can distribute cables after installing splitters and also can draw out room fiber optic cables by direct or cross-connections. They are with the function of mechanical splice, fusion splice, light splitting, wiring distributions etc.

  • Single Three Phase PLC Communication Module

    Topscomm single/three phase power line carrier (PLC) communication module is developed on TCC081 series of PLC chips.

  • PM CWDM Components

    Low insertion loss High Extinction Ratio High channel isolation High stability and reliability

  • 5G CPE SIM Card WiFi-6 Router System

    5G CPE SIM Card WiFi-6 Router System supports 5G network, you will be able to customize your network with the required features such as low latency for ultra-smooth gaming, high bandwidth for easy VR/AR/4K/8K experience, etc. Faster upload speeds embrace a whole new experience.

  • 1.25G DWDM SFP Optical Transceiver

    1.25G SFP optical transceiver module, support 1.25Gb/s and up to 120 km transmission, including: SFP SR, SFP LR, SFP ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, network switch, PTN, OTN and so on.

  • RJ45 Ethernet Extension Cable Cat 5 Cat6 Cat7 Cat8

    RJ45 ethernet extension cables are widely used for lan network,such as home,office,cafe,hotel,etc.where the patch cable is not long enough,UTP,FTP,SFTP,etc.are available.

  • 16 OTAPs Passive Network Optical Taps

    16 OTAPs Network Optical Taps, Support 8 lines traffic copy Low insertion loss – minimize impact on data flows Fully passive – monitoring infrastructure does not impact network availability Does not modify traffic – tools see real copies of the packets from the network Requires no power and does not have an IP address, providing safety from remote attacks Cost effective – avoid costly expenses managing SPAN ports

  • SC Adapter Type Fiber Optical Fixed Attenuator 1dB 2dB 3dB 5dB 10dB 15dB 20dB 25dB 30dB

    Adapter type fixed attenuator is the female to female fixed fiber optic attenuator,whichutilizes the air gap between two connectors to achieve the optical attenuation. Fixed adapter type attenuator is simple, low-cost and compact. It is recommended for use where return loss is not a concern nor is absolute attenuation value.

  • 1000BASE-ZXC SFP 1550nm 160km DOM LC SMF Transceiver

    1000BASE-ZXC SFP 1550nm 160km DOM LC SMF Transceiver is designed for use in 100GBASE Ethernet and 4x28G OTN client interfaces throughput up to 160km over single mode fiber(SMF) using a wavelength of 1550nm via duplex LC connectors. Taking BOX+FPC+PCBA separate design, it has great reliability, airtightness and heat dissipation performance. This transceiver is compliant with IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in various applications, such as 100G Ethernet, 112G OTN OTU4, telecom, service provider applications and 5G wireless network.

  • 40CH DWDM MUX DEMUX Card

    IL<3.5dB , 100GHZ DWDM AAWG Technology Multiplexing of 40 Channels over a Dark Fiber Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Support Metro, Regional and Long Haul DWDM Networks

  • Optical Fixed Attenuator Male to Female E2000 UPC APC 1dB 2dB 3dB 5dB 10dB 15dB 20dB 25dB 30dB

    Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical power, avoid optical receiver distortion due to input optical power powerful. The fixed fiber optic attenuator can achieve the dual function of adapter and attenuators.

  • 1480/1550nm Polarization Maintaining Filter WDM

    Low insertion loss High Extinction Ratio High channel isolation High stability and reliability

  • 5G Optical Fiber and Power Hybrid Cable

    5G Hybrid Cable is for the purpose of 5G base station,with good mechanical&optical performance,stable&durable.The all-dry hybrid cable structure offers the transmission and power supply for RRU equipments.

  • 1.25G BIDI SFP Optical Transceiver

    1.25G SFP optical transceiver module, support 1.25Gb/s and up to 120 km transmission, including: SFP SR, SFP LR, SFP ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, network switch, PTN, OTN and so on.

  • FC Adapter Type Fiber Optical Fixed Attenuator 1dB 2dB 3dB 5dB 10dB 15dB 20dB 25dB 30dB

    Adapter type fixed attenuator is the female to female fixed fiber optic attenuator,whichutilizes the air gap between two connectors to achieve the optical attenuation. Fixed adapter type attenuator is simple, low-cost and compact. It is recommended for use where return loss is not a concern nor is absolute attenuation value.

  • 155M BiDi SFP TX1490/RX1310nm 20KM LC Optical Transceiver

  • Dual 2x2 Bypass Mechanical Optical Switch

    Unmatched Low Cost, Dual 2x2 Bypass Mechanical Optical Switch Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

  • 1 x N Multipath Channel Switch Device

    Optical transmission system LAN light source/detector auto exchange and optical sensor monitoring system Optic fiber, Optical passive components, Optical network and cable testing

  • Single Fiber 20CH (40waves) DWDM MUX/ DEMUX, LC/UPC, 1U Rack

    IL<3.5dB , 100GHZ DWDM AAWG Technology Multiplexing of 20 Channels over a Single Fiber Bidi Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks

  • Indoor Optical Fiber and Power Hybrid Cable

    Indoor Hybrid Cable is for indoor installations that utilize a centralized power supply to remote power and devices, thus eliminates the need to provide local AC power to each location.The two copper wires provide power from a centralized power supply to end devices while fiber optic elements provide bi-directional data paths through the cable.

[  A total of  49  pages]
Leave a Message to Professional Supplier,Response with 24h! X
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.