SZOPT offers a full range of CWDM&DWDM to meet the demand of applications such as: Gigabit & 10G Ethernet,SDH/SONET,ATM,ESCON,Fibre Channel,FTTx and CATV,etc.

Huge capacity transmission Excellent 100G transmission performance Flexible and comprehensive service access capability Telecom Reliable protection Excellent structure, convenient and easy to maintain

10G SFP+ optical transceiver module, support 10Gb/s and up to 100 km transmission, including: SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on.

Optical Cable Cross-connection Cabinet is used as the interface device at the splice of the trunk cable and wiring cable in the access network. It is mainly used for the connection, distribution and scheduling of the outdoor cables.The fiber capacity can be 12 core,24 core...288 core and 576 core max.

Capacity: 1KVA-6KVA Inverter Features: Wide working temperature : -40℃~55℃; Output 48Vdc and 280Vdc modules for selection; Modular design for easy installation; IP65 for outdoor Description: HW SERIES is 5G POWER SUPPLY for telecommunication with 48Vdc output and 45V50AH lithium battery inside. It's IP65 design.

100G QSFP28 BIDI optical transceiver module is a pluggable optical transceiver with a Simplex LC connector interface for long-reach data communication and interconnect applications using one core Single-Mode Fiber (SMF).

Mobile network operation is increasing nowadays,SZOPT’s network infrastructures cable assemblies are keeping up with the continuous high-bandwidth growth,and excel subscribers’ expectations.What’s more,to add the capacity and coverage, we are involved in deploying distributed antenna system (DAS) networks and small cells.

Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical power, avoid optical receiver distortion due to input optical power powerful. The fixed fiber optic attenuator can achieve the dual function of adapter and attenuators.

Fiber Adapters (Mating Sleeve Fiber Adapter or Standard Fiber Adapter or Bulkhead Type Fiber Adapter) also called fiber adaptors,are used to link optical cables or device. Usually they are female to female,or female to male. SZOPT’s fiber adapters are mainly with ceramic sleeves, but phosphor bronze sleeve is an option for some special requirement.

Supports transparent transmission of any type of service in four 42M~11.3G rate ranges, and converts four service optical signals into four WDM standard wavelength optical signals. Client-side interface: 4 SFP+ hot-pluggable, compatible with SFP WDM-side interface: 4 SFP+ hot-pluggable, compatible with SFP

Outdoor Hybrid Cable is for outdoor installations that utilize a centralized power supply to remote power and devices, thus eliminates the need to provide local AC power to each location.The two copper wires provide power from a centralized power supply to end devices while fiber optic elements provide bi-directional data paths through the cable.

IL<3.5dB , 100GHZ DWDM MUX/ DEMUX, Multiplexing of 9 Channels over a Single Fiber Bidi Network with Red and blue filter for long distance application Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks

SZOPT offers a full range of CWDM&DWDM to meet the demand of applications such as: Gigabit & 10G Ethernet,SDH/SONET,ATM,ESCON,Fibre Channel,FTTx and CATV,etc.

Low insertion loss High Extinction Ratio High channel isolation High stability and reliability

Optical transmission system LAN light source/detector auto exchange and optical sensor monitoring system Optic fiber, Optical passive components, Optical network and cable testing

up to 1x64 Mechanical Optical Switch Unmatched Low Cost Low Optical Distortions High Isolation High Reliability Epoxy-Free Optical Path

Analog mobile radio has never been so cost performance as with the KT-8R. Mini color screen, quad band , quad standby,. Suitable for various scenarios. The mini size, simple design, excellent quality and full-range VHF 136-174MHz(220-270MHz) and UHF 400-480MHz(350-390MHz) allowing you to enjoy all kinds of convenience and quickness.

16 OTAPs Network Optical Taps， Support 8 lines traffic copy Low insertion loss – minimize impact on data flows Fully passive – monitoring infrastructure does not impact network availability Does not modify traffic – tools see real copies of the packets from the network Requires no power and does not have an IP address, providing safety from remote attacks Cost effective – avoid costly expenses managing SPAN ports

Single channel 3 port 50GHZ DWDM filter, DWDM C-Band. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

Topscomm single/three phase power line carrier (PLC) communication module is developed on TCC081 series of PLC chips.