L-Menthyl lactate has a weak odor somewhat reminiscent of tobacco and chamomile. It is almost tasteless, with a lasting gentle cooling effect.
Lanthanum Hydroxide is a highly water insoluble crystalline Lanthanum source, which can be obtained by adding an alkali such as ammonia to aqueous solutions of lanthanum salts such as lanthanum nitrate. This produces a gel-like precipitate that can then be dried in air. Lanthanum hydroxide does not react much with alkaline substances, however is slightly soluble in acidic solution. It is used compatibly with higher (basic) pH environments.
Melamine Resin marble look is a kind of special melamine granule which is widely used to produce plates,bowlsand chopsticks etc.
Pure Germanium Metal is a hard, lustrous, gray-white, brittle metalloid. It has a diamondlike crystalline structure and it is similar in chemical and physical properties to silicon. UrbanMines specialize in high purity Germanium Ingot, Rod,Particle,Powder.
Selank is a new Nootropic substance show on the market in recent years. It is considered to be heptapeptide and an accessory drug or substance which has anxiolytic (anti-anxiety) effects.
Terbium(III,IV) Oxide, occasionally called tetraterbium heptaoxide, has the formula Tb4O7, is a highly insoluble thermally stable Terbium source. Tb4O7 is one of the main commercial terbium compounds, and the only such product containing at least some Tb(IV) (terbium in the +4 oxidation state), along with the more stable Tb(III). It is produced by heating the metal oxalate, and it is used in the preparation of other terbium compounds. Terbium forms three other major oxides: Tb2O3, TbO2, and Tb6O11.
Flavor specially for bakery; 14 years manufacturer of flavor and fragrance with ISO9001, ISO14001, ISO22000 Certificated; Over 500 kinds of flavors are available; Hight quality and favorable factory price. Dosage for beverage: 0.05-0.3%
iSuo Chem® standard purity dimer acid. Factory Directly Supply dimer fatty acid is nontoxic, nonirritating, high flash point and fire point not freeze under low temperature, good viscosity and good congluti-nation. It dissolves in the majority of solvents, never dissolve in the water.
The styrene modified C5 resin HC51100 is a thermoplastic hydrocarbon resin. The hydrocarbon resin has a low molecular weight, low odor. Styrene modified C5 resin has better viscosity and good solubility with different materials. It has lower softening point and lower the polar of the C5 Resin.
Cuprous Oixde Cu2O Nanopowders is widely used as antifouling paint.
In the DCPD resin based on hydrogenated reaction producing DCPD resin with high bright, light color, has the advantages of good thermal stability; Widely use in hot melt adhesive industry.
Brand Name:JC Model Number:JC1201AB Type:double-component adhesive Product name:Epoxy AB Glue Application:Jewelry Color:Clear Keywords:Epoxy AB Resin MOQ:200 sets Packing:Carton Volume:236 ml Shelf life:6-12 Months Mixing Ratio:A:B=1:1 OEM:OEM Services Provided
HT-9130 C9 Resin is made by C9 fraction, through polymerization. High softening point Hydrocarbon resin C9 HT-9130 is granular solid with the color of yellow to light brown. HT-9130 has the properties of good solubility, mutual solubility, water resistance, insulation and very good chemical stability over acid and alkali, and good adhesive strength and lower heat conduction, etc.
1. concentrate Flavor specially for beverage; 2. Liquid flavours 3. Dosage for beverage: 0.05-0.3% 4. More than 500 kinds of flavors for beverage are available 5. Packing: 2kg, 5kg, 20kg PE Jerry Can bottles 6. MOQ: 5kg for each flavor 7. High quality and factory price
PF-700 is liquid dispersion products offer a practical method for PTFE coating or impregnating various materials and substrates to obtain properties typical of fluoroplastics such as, chemical resistance, low coefficient of friction, excellent dielectric and release characteristics and a wide service temperature spectrum.
CAS No.:38891-59-7 Other Names:epoxy resin ab glue MF:C15H16O2C2H7ONC3H5OCl EINECS No.:231-072-3 Place of Origin:Guangdong, China Classification:Double Components Adhesives Main Raw Material:Epoxy Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Decoration Brand Name:JC Model Number:312AB-8 Type:Two Component Product name:Epoxy Resin Crystal AB Glue Application:potting Certificate:RoHS MSDS REACH Shelf life:6 Months MOQ:1 KG Mixing Ratio:A:B=3:1 Volume:1000ml OEM:OEM Services Provided Packing:1KG/Set
Brand Name:jincheng, jincheng Model Number:uv001 Type:component adhesive Product name:UV resin Material:resin Color:Transparent Shelf life:24 Months MOQ:10PCS Package:10g,15g,30g,50g,80g,100g,200g,250g,500g,1kg Keywords:uv adhesive resin OEM:OEM Services Provided
Brand Name:JC Model Number:JC1201AB Type:double-component adhesive Product name:Epoxy AB Glue Application:Jewelry Color:Clear Keywords:Epoxy AB Resin MOQ:200 sets Packing:Carton Volume:236 ml Shelf life:6-12 Months Mixing Ratio:A:B=1:1 OEM:OEM Services Provide
Sorbitol Liquid/powder CAS No.50-70-4 New kind of sweetener made from purified glucose