Excavator Undercarriage Parts front idler D61P The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Undercarriage Parts Bulldozer D65 Front Idler The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Dozer front idler for D68E bulldozer undercarriage parts The four wheels refer to: rollers, drive wheels, idlers, and carrier pulleys. One belt refers to the tracks. As the name suggests, the rollers act as support and are located between the lower surface of the left/right beam of the chassis frame and the track. According to the tonnage of the excavator, there are usually 5-10 on one side. The driving wheel plays the role of driving the track, which is fixed on the travel motor, and the drive of the travel motor is transmitted to the track through the gear structure, usually one on each travel motor. The idlers act as guides the tracks, located at the opposite end of the drive wheels, usually two per excavator. The carrier roller plays the role of holding up the track, and according to the tonnage of the excavator, there are usually 1-2 carrier rollers on one side. Our products are according to the standard of OEM to manufacture.

Excavator Undercarriage parts front idler guide wheel For DH55 The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator Front Idler Assy Guide Wheel Roller DH220 Idler For Daewoo The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Idler Dh280 Replacement For Daewoo Excavator Parts The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator Bulldozer E70B Front Idler Undercarriage Parts The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

EC140 Excavator bulldozer Track dozer Front Idler guide Roller sprocket Wheel for volvo The four wheels refer to: rollers, drive wheels, idlers, and carrier pulleys. One belt refers to the tracks. As the name suggests, the rollers act as support and are located between the lower surface of the left/right beam of the chassis frame and the track. According to the tonnage of the excavator, there are usually 5-10 on one side. The driving wheel plays the role of driving the track, which is fixed on the travel motor, and the drive of the travel motor is transmitted to the track through the gear structure, usually one on each travel motor. The idlers act as guides the tracks, located at the opposite end of the drive wheels, usually two per excavator. The carrier roller plays the role of holding up the track, and according to the tonnage of the excavator, there are usually 1-2 carrier rollers on one side. Our products are according to the standard of OEM to manufacture.

Excavator Undercarriage Spare Parts EC210 Front Idler Roller fit for Volvo The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

EC240 IDLER Excavator Undercarriage Parts Fit For Volvo The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator Idler EC360 Undercarriage Parts Front Idler 1081-03910 The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator And Bulldozer Parts Excavator EC460 Track Wheel Front Idler The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Ex30 Excavator Parts Front Wheel Idler fit for Hitachi The four wheels refer to: rollers, drive wheels, idlers, and carrier pulleys. One belt refers to the tracks. As the name suggests, the rollers act as support and are located between the lower surface of the left/right beam of the chassis frame and the track. According to the tonnage of the excavator, there are usually 5-10 on one side. The driving wheel plays the role of driving the track, which is fixed on the travel motor, and the drive of the travel motor is transmitted to the track through the gear structure, usually one on each travel motor. The idlers act as guides the tracks, located at the opposite end of the drive wheels, usually two per excavator. The carrier roller plays the role of holding up the track, and according to the tonnage of the excavator, there are usually 1-2 carrier rollers on one side. Our products are according to the standard of OEM to manufacture.

Excavator Undercarriage Parts Ex60-1 Track Idler Roller fit for Hitachi The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator EX100 Undercarriage Parts Front Idler Assembly The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator undercarriage parts idler,front idler, idler wheel EX200 The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

Excavator Front Idler EX300-5 Undercarriage Spare Parts The four wheels refer to: rollers, drive wheels, idlers, and carrier pulleys. One belt refers to the tracks. As the name suggests, the rollers act as support and are located between the lower surface of the left/right beam of the chassis frame and the track. According to the tonnage of the excavator, there are usually 5-10 on one side. The driving wheel plays the role of driving the track, which is fixed on the travel motor, and the drive of the travel motor is transmitted to the track through the gear structure, usually one on each travel motor. The idlers act as guides the tracks, located at the opposite end of the drive wheels, usually two per excavator. The carrier roller plays the role of holding up the track, and according to the tonnage of the excavator, there are usually 1-2 carrier rollers on one side. Our products are according to the standard of OEM to manufacture.

Excavator Undercarriage Spare Parts EX360 Front Idler fit for Komatsu The idler is composed of collar、idler shell、shaft、seal、o-ring、bushing bronze、lock pin plug，the idler is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavators of Caterpillar,Komatsu,Hitachi,Kobelco,Kubota,Yanmar and Hyundai etc,have different manufacturing technology,like casting,welding and forging,use precision processing technology and special heat treatment technique to reach best wear-resistance and have maximum extent loading capacity as well as anti-cracking. Our products are according to the standard of OEM to manufacture.

Excavator undercarriage part R200 front idler assembly The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.

R225-7 Excavator Front Idler Undercarriage Parts Track Idler The function of an idler is to guide the track links into running smoothly and to prevent dislocation,idlers also carry some weight and therefore increasing groud pressure.there is also an arm in the center which supports the track link and guides the two sides.the smaller the distance between the idler and track roller,the better the orientation. Our products are according to the standard of OEM to manufacture.