In excavators, water temperature sensors are typically installed in the engine's coolant circulation path. The exact location may vary depending on the model and configuration of the excavator, but is typically located on a water pipe near the engine block or cylinder head. In this way, the sensor has direct access to the coolant and thus accurately measures the operating temperature of the engine. Our products are according to the standard of OEM to manufacture.

2380112 Water Temperature Sensor for Caterpillar E320D 320D Understanding where an excavator's water temperature sensor is installed and how it works is essential for the proper operation and maintenance of the excavator. In daily use, we should regularly check the working status of the sensor and replace or repair it in time when it fails. Our products are according to the standard of OEM to manufacture.

256-6453 2566453 Temperature Sensor for CAT E330D E345D After the water inlet process is completed, the computer in the temperature control part sends a command to the electric valve that supplies the heat medium to "open", and the system starts to heat the water in the container. When it comes to the set temperature. The controller issued a command to close the valve, cut off the heat source, and the system entered the insulation state. In the process of programming, the electric control valve that controls the heat source is not opened when the system does not reach the safe water level, so as to avoid heat loss and accidents. Our products are according to the standard of OEM to manufacture.

Engine water pump 172-7767 2W8001 for Caterpillar The function of the structural water pump is to pressurize the cooling water, so that the cooling water circulates and flows in the cooling system. The pump transmission mode is gear transmission, and the speed of the water pump is 1. 5 times the speed of the diesel engine. Pump installation and maintenance parts.

Excavator Water Pump 119810-42002 Yanmar Engine Part Water Pump it is an important part of the vehicle engine, it can circulate the coolant to keep the engine at normal operating temperature. Our products are according to the standard of OEM to manufacture.

Detailed Product Description Product Name: Engine Water Pump Part No.: 129327-42100 Engine No.: 3D84 Place Of Origin: China Order Quantity: 1 Piece Application: Excavator Packaging Details: Normal Packing Payment Terms: T/T, Western Union High Light: 3D84 Excavator Water Pump, YM129327-42100 Excavator Water Pump

Detailed Product Description Product Name: Engine Water Pump Part No.: 5136101870 5136101500 Engine No.: 4BA1 Place Of Origin: China Order Quantity: 1 Piece Application: Excavator Material: Iron Packaging Details: Standard Export Packing Or Per the customers' Requestment High Light: 4BA1 Engine Water Pump, 5136101500 Engine Water Pump, 5136101870 Engine Water Pump

1K321-73030 Excavator Fuel Pump 6BT-3636318 The function of the fuel pump is to suck the fuel out of the fuel tank, pressurize it and transport it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure. Our products are according to the standard of OEM to manufacture.

1W1700 Excavator Engine Fuel Transfer Pump For D350E The function of the fuel pump is to suck the fuel out of the fuel tank, pressurize it and transport it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure.

Oil pump 2Z 1Z 1DZ 15100-78700-71 06A115105B The fuel system of the excavator is mainly composed of fuel tank, filtration system, oil inlet pipeline, oil return pipeline and fuel system inside the engine, etc., the fuel system is a very important system, and the quality of the system design directly affects the engine power and the efficiency of the excavator. The fuel system inside the engine is very precise, it needs better lubrication and cooling, in order to ensure that these components regularly and quantitatively inject mist high-pressure fuel, so that it is possible to give full play to the power of the engine and effectively reduce engine emissions. Our products are according to the standard of OEM to manufacture.

4BD1 4BD1T 4BD1-T oil pump 8-94114491-1 8941144911 L210-0004S for ISUZU Parts The function of the fuel pump is to suck the fuel out of the fuel tank, pressurize it and transport it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure. Our products are according to the standard of OEM to manufacture.

S6D95L S4D95L PC100 120-6 PC1011oil pump 6207-51-1201 6207511201 21MM for KOMATSU Because the engine has air entering the fuel tank during the oil return process, the change of fuel temperature will also increase the pressure in the fuel tank, therefore, the fuel tank must be designed with a vent to ensure that the pressure in the fuel tank shall not exceed 50kPa. In order to reduce the amount of dust in the air entering the tank, the air vents should be fitted with air filters. The fuel tank must have a 1.5mm vent and an oil return connection to facilitate the separation of air and other gases from the fuel without pressure in the fuel tank, and the vent must be able to avoid the ingress of dirt and water. The vent can be integrated with the fuel filler, and the fuel filler must be equipped with a filter with a filtration accuracy of 60um to prevent dirt from entering the fuel tank when filling fuel Our products are according to the standard of OEM to manufacture.

6207-31-3101 S6D95 engine connecting rod for PC200-5 excavator machinery parts high quality In excavators, the linkage mechanism is used to drive the movement of the arm and bucket, thereby achieving the function of digging and grasping objects