Sales

Automatic C channel forming machine with Taiwan Quality and China price is easily to change size by computer which will save your time and money.

Product Detail

Advantages of Automatic C channel roll forming machine :

1. Automatically change different size in one minute, without changing rollers or spacers.

2. Post-cutting design, no worry about twist and flare caused by Pre-cutting design.

3. With computer controlled system which easy to operate and save time and cost .

4. Post-cutting system or fly-cutting for option.

We are the first and only factory to have a whole Baking Finishing Line to treat the spare parts.

Profile drawing:

Product specification:

Bottom width (W)	100-300mm
Heigh(H)	40-100mm
Small side(E)	10-20mm
Material width(λ)	185-525mm
Material thickness(&)	Q235（1.8-3.5mm)/G350(1.8-2.8mm)
Embossing way	Embossing with "一"
Chain size	1.5 inch + 1.75 inch + 2.0 inch
Main shafts diameter	φ90/75mm Round steel with quenching and tempering treatment
Levelling shaft diameter	solid rollers φ110mm（upper2,down3）
Wall panel thickness	30mm
Machine base size	H446*199
Driving power	Servo motoer 45KW
Punching and cutting power
Forming speed	30m/min without punching
No. of punching	3 sets（double+double+single）14*25
Changing way	Unlimited change 0.37/0.75KW
Punching and cutting mode	Pre punching and cutting + Post cutting
roller material	Cr12
Forming station	4+5+5=14 Stations (without embossing）
Blade material	Cr12Mov, Heat treatment after wire cutting
Control mode	PLC（Taiwan FATEK）

Main features：

1. Feeding material guide and leveling device

Two rollers (one up and one down roller) for material guide and 5 rollers ( 2 up and 3 down rollers ) for straightening. solid and shafts diameter=φ110mm

2. Pre-punching system
With 3 cylinders (one cylinder for single hole and 2 cylinders for dual-holes.)
Also, can make more punching sets as customer’s requires.

3. C purlin machine rollers and shafts
All the rollers manufactured from bearing steel GCr15, precision machined, hard Chrome Coated;
Shafts manufactured from #45 steel or Gcr15 for optional,

Main Shaft Diameter=φ90/75mm, quenching and tempering treated

4. C purlin machine post-cutting system:
No need to change cutter for different size; Unlimited specification changing for height and bottom width;
Cutting blades made by high quality mold steel Cr12 with heat treatment
Cutter frame made from high quality 30mm steel plate by welding

5.Control System
C purlin machine control box
(Touch screen brand: WEINVIEW, Inverter brand: Finland VOCAN/Taiwan DELTA/ALPHA, Encoder brand: Japan Koyo/OMRON)

6.Uncoiler
C purlin machine uncoiler
One set manual uncoiler, Un-powered, manually control steel coil inner bore shrinkage and stop
Max. feeding width: 500mm, coil ID range 470mm±30mm