specially designed for steel industry; particularly suitable for high speed rolling mills;

TTSP Steering Joint Thrust Bearings (with cage) Models List - SKET Company

specially designed for steel industry; allowing greater radial load;

6002ZZ (I.D.=15mm, O.D.=32mm, Thickness=9mm); 6002ZZ bearing are shielded on BOTH SIDES to keep lubricant in; Chromium Steel long-life bearings, smooth and low noise.

Linear Bearings LM35UU, Smooth moving, Low friction, High rigidity, Long working life. . Item: LM35UU Linear Motion Bushing . Type: Linear Motion Bushing . Size: 35mm x 52mm x 70mm . Lead Time: 10 to 60 days . Product Origin: Fuzhou, Fujian, China . Shipping Port: Fuzhou, Ningbo, Yiwu, Shanghai . Payment: T/T, L/C

DAC28610042, DAC286142AWCS40, 28BWD01ACA60 Auto wheel hub bearing

NSK deep groove ball bearings are the most representative and widely used bearing. It can accommodate axial loads in both directions, in addition to radial loads and high speeds.

Komatsu Excavator Pc120-6 Arm Cylinder Seal Kit 707-99-44200

popular for use on roll necks; allowing greater radial load;

MR74ZZ Miniature Shielded Bearing 4mm x 7mm x 2.5mm, the inner diameter is 4mm, outer diameter is 7mm and the width is 2.5mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.

7600/32300(7603E-7636E/32303-32336) Series Single-row Tapered Roller Bearings

R8RS pulley bearing are with Chrome Steel + PA66 &15% glass fiber with size 12.7*44.8*17.3mm ,are widely use for sliding door ,sliding window .

effective in operation; working under the toughest working environment;

HM231140/HM231116D Large Size Inch Tapered Roller Bearing

The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm

professional manufacturer of bearings for steel mills of billets, bars, sections, angles, beams, wire rods, coils, etc. best bearing steel to ensure the bearing can work under highest loads P6 precision for higher wear-resistance ready stock available

Tapered roller bearings refer to radial thrust rolling bearings in which the rolling elements are tapered rollers. There are two kinds of small cone angle and large cone angle. The small cone angle mainly bears the combined radial and axial loads mainly with radial loads. It is often used in pairs and installed in reverse.

Komatsu Excavator PC200-7 boom Cylinder Seal Kit  707-99-46130

popular for use on roll necks; allowing greater radial load;