Air Cooling UV Solidify Machine, Emitting Window:104*25mm, is designed as a simple, low cost, small form factor air-cooled UV LED curing lamp for pinning and curing of inks, coatings and adhesives, mobile phone touch screen.
The AnnexCureTM EB168 UV Solidify Machine provides highest output power in an extremely medium mechanical package for high speed pinning and full cure applications. The EB168 UV LED source is CE, RoHS, and REACH compliant.
Performance of Instant Curing UV Glue UV LED Dryer Lamp :
|
365nm |
385nm 395nm 405nm |
Peak Irradiance (Flat Glass) |
8w/cm2 |
8w/cm2 ~ 16w/cm2 |
Emitting Window |
104mmx25mm |
104 x25mm |
48Vdc Power In (Typical) |
500w/10A |
500w/10A |
48Vdc Power In (Maximum) |
500w/10A |
1000w/20A |
DB13W3 Connector Pins of Air Cooling UV Curing Systems for Printing :
Pin |
Fuction |
Input/Output |
Range(min/max) |
Comments |
4 5 |
Intensity Control |
Input |
0~10V |
Input voltage is converted to required current to achieve desired intensity where 5V = 100% and 1.0V = 20%. A minimum voltage of 1.0V is required for proper LightSource operation. Note: Aslo can be set to 0~5V by TP |
3 8 |
Enable signal |
Input |
Dry Switch |
. ON= LED UVLampON OFF= LED UV Lamp OFF |
2 7 |
Intensity Enable |
Input |
Dry Switch |
ON = Intensity Control valid OFF = Intensity Control invalid |
1 6 |
Alarm Output |
Output |
Dry Switch |
ON = Error OFF = No Error Error including three types: 1 Over temperature 2 LED string open 3 LED short (Debugging) |
9 10 |
Communication lines |
Input/Output |
Modbus |
|
A1 |
+48VDC Power Input |
Input |
+47V to +49V |
+48VDC Power Input to power Light Source |
A2 |
Ground |
--- |
0.0V |
+48VDC Return, Ground |
A3 |
PE |
|
0.0V |
Protective Earth, Ground |
DIMENSIONS of High Power UV Coating Curing Machine without Ozone :
Units of measurement: mm
Dimensions |
104 x 25 |
L |
104 |
H |
204.5 |
W |
157.8 |
UV Emitting Area |
104 x 25 |
Weight(kg) |
2.3 |
For more about Hand-held Printer UV ink Ultraviolet UV Lamp, please contact : 1651063690jennifer@gmail.com (Jennifer)