AGS series screw type air cooled water chillers are widely used in plastic, electroplating, electronics, chemical, pharmaceutical, printing, food processing and other various industrial refrigeration process need to use chilled water areas.Only the highest quality materials used and that made by workers with the most experience and knowledge in the industry.
Air Cooled Industrial Chiller Plant Units AGS-060ASH
Specification
Model Item |
AGS-060ASH |
|
nominal cooling capacity |
kcal/h |
151188 |
kw |
175.8 |
|
input power |
kw |
64 |
max.runing current |
A |
132 |
power supply |
3PH 380V 50HZ |
|
refrigerant |
type |
R22/R407c/R410a/R134a |
kg |
42 |
|
type of control |
expansion valve |
|
compressor |
type |
sewi-hermetic screw |
51.7 |
||
start-up mode |
Y-△ |
|
capacity control(%) |
0-25-50-75-100 |
|
evaporator |
type |
Shell and tube |
chilled water flow(m3/h) |
30.2 |
|
inlet and outlet pipe caliber(inch) |
3 |
|
condenser |
type |
air cooled high-efficient inner threaded copper-tubing aluminum fin type |
fan |
type(m3/h) |
low noise outer rotor |
power(kw) |
9 |
|
cooling air flow(m3/h) |
63000 |
|
safety protection |
compressor overheating protection, over-current protection, high and low pressure,over-temperature protection, flow switch, protection,phase sequence or missing phase protection, exhaust overheating protection |
|
weight |
kg |
1930 |
dimension |
mm |
2400*2000*2180 |
Note: 1. Nominal cooling capacity is according to:
Inlet chilled fluid temperature: 17℃; Outlet chilled fluid temperature: 12℃
Inlet cooling air temperature: 30℃; Outlet cooling air temperature: 35℃
2.Working Range:
The temperature range of chilled fluid is from 5℃ to 30℃
Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃
Temperature difference between inlet and outlet cooling air is from 8℃ to 10℃
We reserve the right to modify the above dimensions or parameters without further notice.