> Read 125KHz EM / 13.56MHz Mifare (Factory default: EM 125KHz)> Metal backlight keypad> Contains card reader mode. The transmission format could be adjusted by user.
> Card type: 125KHz or 13.56MHz Card> RF007EM: 125KHz (WG26 output)> RF007Mifare: 13.56MHz (WG34 output)
Input voltage: AC 100~240V 50/60HzOutput voltage: DC12V 2AMaterial: ABS plasticDC interface: 5.5x2.1
> Metal Case, anti-vandal> Waterproof conforms to IP66> Wiegand 26~37 bits output (default: 26bits)> Card type: EM card> Reading range: 3~8cm> External LED Control & External Buzzer Control
Door Stops Work with all Kind of Single & Double Smokeproof Doors
> Wiegand Reader > Card type: Support EM+HID+Mifare> Waterproof IP66> Wiegand 26-37 bits output(default: 26bits)> External LED Control & External Buzzer Control, Built-in LDR for anti-tamper(Optical Back Tamper)
> Card type: EM Card> Metal case, anti-vandal> Waterproof conforms to IP66> One relay, 2000 users, standalone> Pulse mode, toggle mode> Built-in LDR for anti-tamper> Card block enrolment
> Card type: EM Card> Waterproof, conforms to IP66> One relay, 1000 users> 3 access modes: Card, PIN, Card + PIN> Card type: 125KHZ EM card> PIN length: 4~6 digits> Wiegand 26 bits input & output> Facility code programmable> Latch mode to hold door or gate open
> AC Input Voltage: AC100~240V 50Hz/60Hz> Output Voltage: DC12V> Momentary Current: 5A> Persistent Current: 2A
40-Channel Elevator Controller for Lift or Locker, built-in TCP/IP with free software to manage users.Support RFID/Pincode/Face/Finger to access control 20-40lockers built in TCP/IP with free software
> Card type: EM Card> Metal case, anti-vandal> Digital backlit touch keypad> Multi-function standalone access controller and reader,> WG interface: WG26 Input / output> Capacity: 2000 cards / codes> Three accesses: card, pin, card + pin
>Working current: 120mA/240mA>Safety type: power on to close the door and power off to open the door>Maximum pull: 60kg linear pull
> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell
> With LED (Red only)> Voltage: DC12V and DC24V> Holding Force: 280KG (600Lbs)> Lock Size: 250Lx48.5Wx25H(mm)> Current Draw: 12V/500mA 24V/250mA
> Standard Structure: Stainless steel, Wire Drawing Finished > Suitable for Door: glass door> Glass Thickness: 10-15mm> Opening Mode: 180°Degress Door> Use with: BL-2001 series> Finished for Shell: Stainless steel Wire Drawing
>Signal output: NC, NO signal output, can remotely monitor the working status of the ground suction