>Sensing distance: 15-25mm>Switch form: NC-Normally Close>Electrical parameters: maximum power 10W, maximum voltage 100V, maximum current 0.5A

>type: wall-mounted>Air pressure:86~106Kpa>Working temperature: 0~55 ℃

> Material Selection: High Strength Aluminum, Sandblast Finished> Suitable for Door: In-swing Door> Opening Mode: 90° Degrees Door> Finished for Shell: Anodized aluminum

> 999 users, user data can be transferred> Multi-access modes: Card, Card or PIN, Card with PIN and multi Cards/PINs> Can connect with any reader with Wiegand 26~44, 56, 58, 64 bits output> Can connect with any keypad reader with 4bits, 8bits (ASCII) output> 12~28V AC/DC power input, 12V DC output> Can connect with external alarm and door contact

>Power supply: 4.5V-6V>Quiescent current:<50-65mA>Working current: >250mA (strong driving ability)

> Built in LED, door sensor and time delay> Voltage: DC12V or DC24V> Current Draw: 12V/500mAx2 24V/250mAx2

> Card type: EM Card > Multi-function standalone device can be used as the WG26 card reader > Capacity: 2000 card users, 2000 PIN users > Three-door open methods: card, code, card+code > Backlit keypad: Can operate keyboard in dark nigh

> Card type: EM Card> Dimension: 120 x 56 x 18mm> Access Control Keypad Containing 2000 users with Pincode

Dimensions: 86x86x14mm

I bracket is used to install the plate on the door leaf.

> Built in LED, door sensor and time delay> Holding force: 350KGx2 (800LBSx2)> Voltage: DC12V or DC24V> Current Draw: 12V/480mAx2 24V/240mAx2> Lock Size: 500Lx55Wx28H(mm)> Armature plate: 190x45x11(mm)

> Relay: NO NC COM> User Capacity: 1000users> Working Voltage: 9-24V> Support Wiegand 26-37bits output> APP download is available for Android only> APP name: Ksmart

> Material Selection: High Strength Aluminum, Sandblast Finished> Suitable for Door: In-swing Door> Opening Mode: 90° Degrees Door> Finished for Shell: Anodized aluminum

> Card type: EM, HID, MF, CPU Card(Factory default: EM 125KHz)> Metal backlight keypad> Fingerprint capacity: 2000 users> Dimensions: 155x45x21mm> Waterproof IP68

> Card type: 125KHz or 13.56MHz Card> KR100EM: 125KHz (WG26 output)> KR100Mifare: 13.56MHz (WG34 output)

> Metal Case, anti-vandal> Waterproof, conform to IP66> Card Type: 125KHz EM & HID Cards/Fobs> Wiegand Format: Wiegand 26 default> Keypad Transmission: 4 bits> Reading range: 4~8 cm

> Card Type: EM Card > Metal case, anti-vandal > Digital backlit touch keypad > Multi-function standalone access controller and reader, > WG interface: WG26 Input / output > Capacity: 2000 cards / codes

> Card type: EM Card> Full programming from the keypad> WG26 Input/output> 2000 uses, supports Card, PIN, Card + PIN> Digital backlit keypad> Red, Yellow, and Green LEDs display the working status

Dimension: 115x40mm, suit the 40 plate.

> Door open: Finger/Pincode/MechancialKey> Door thickness: 40mm-120mm available> Working Voltage: 4pcs lithium battery> Finger Capacity: 300pcs> Lock body: SUS 304 stainless steel> Built in USB> Working temperature: -30°~ 50°range