AC to DC 12V 48W Constant voltage LED driver

Sales

AC to DC 12V 48W Constant voltage LED driver

Input Voltage : 100-265V
Output Voltage : 12VDC
Output Current : 4A
Working Mode : Constant Voltage
Certification : ETL CE ROHS
Warranty : 2 years

Product Detail

Product name: AC to DC 12V 48W Constant voltage LED power supply

Specification of slim power supply 12v 48w

SPECIFICAION
MODEL		SMT-012-048VW	SMT-024-048VW
OUTPUT	DC VOLTAGE	12V	24V
	RATED CURRENT	4.0A	2.0A
	CURRENT RANGE	0~4.0A	0~2.0A
	RATED POWER	48W	48W
	RIPPLE&NOISE(max)	120mVp-p	200mVp-p
	voltage TOLERANCE	12V±5%	24V±5%
	SETUP RISE TIME	60ms/110VAC	60ms/110VAC
	HOLD UP TIME(Typ.)	20ms/230VAC	10ms/110VAC
INPUT	VOLTAGE RANGE	100~265Vac	100~265Vac
	FREQUENCY RANGE	50~60Hz	50~60Hz
	POWER FACTOR(Typ.)
	EFFICIENCY(Typ.)	﹥83%	﹥84%
	AC CURRENT(Typ.)	0.45A/110V, 0.25A/220V	0.45A/110V,0.25A/220V
	INRUSH CURRENT (Typ.)	COLD START 30A/110~220VAC
PROTECTION	Short circuit	Protection type:recovers automatically after condition is removed
	Overload	overload protected@110%~150% above peak rating
	Over temperature	Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT	WORKING TEMP.	-25~+50℃ (Refer to output load derating curve)
	WORKING HUMIDITY	20~90% RH non condensing, refer to IP67
	Vibration	10~500Hz，2G 10min/1cycle,period for 60min,each along X,Y,Z axes
	STORAGE TEMP.,HUMIDITY	-40~+80℃,10~99%RH
SAFETY&EMC	SAFETY STANDARDS	IP67 approved; Design refer to LVD EN61347-2-13:2005,EN61347-1:2008
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC, I/P-COVER: 3KVAC , O/P-COVER:500VAC
	EMC Test Standards	EN55015:2006/A2:2009,EN61000-3-2:2006/A2:2009,EN61000-3-3:20
	MTBF	50KHours （25℃）
NOTE	1.All parameters NOT specially mentoned are measured at 110VAC, 220VAC input,rated load and 25℃ of ambient temperature.
	2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel

	3.Tolerance:includes set up tolerance,line regulation and load regulation.
Label

Specifications

1. Modle: SMT-012-048VW

2. Input: 100~265vAC / 47-63HZ

3. Output : 12V 4.00Amp 48Watt

4. Case material: Aluminum

5. Waterproof rate: IP67

6. Unit weight: 300g

7. Product size: 257*29*21

8. Box size: 299*224*176mm

9. Pack qty: 50pcs/ctn

10.Pack weight: 16kg/ctn

11.Produt cord: 18AWG*20CM

13.Two years warranty (We promise to replace new ones to you if there is any defective happen during the warranty period)

Features

1. High efficiency,save energy ,protected environment.

2. High stability and low ripple, increase light efficiency and decrease light attenuation.

3. Meet to safety standard and EMC

4. Assure LED stability long lift and light efficiency by constant voltage.

5. Integrity protection,over loading, over voltage ,over current.

6. Protections:Short circuit/Overload/Over temperature

7. Cooling by free air convection

8. 100% full load burn-in test.

9. Suitable for LED lighting

Environment

1. Working temp: -30~+50℃ (Refer to output load derating curve)

2. Working humidity: 20~99% RH non-condensing(Waterproof)

3. Storage temp. humidity: -40~+80℃,10~99%RH

Safety

* Safety Standards : IEC 61347 –2–11 , IEC 61347 –1 , IEC 60529 , IP67 approved

* Withstand Voltage : I/P-O/P: 3000KVAC

* Isolation Resistance : I/P-O/P:100M Ohms/500VDC

Applications

Our products are widely used in various industries, such as

* indoor LED illuminating lights

* LED Neon

* LED urban Decoration

* LED Lighting Advertising,

* LED Display

* Safety Protection Apparatus

* Telecommunications

* Networks

* Vehicle Lights Controller Panels，etc.

packing

Our Factory