5V10mA Coin Cell Battery Analyzer is a precision battery tester for coin cells lab research.
5V10mA 8 Channel Coin Cell Battery Tester
Description
It is now widely used by battery research institutes,laboratories, universities and EV battery manufacturers all around the world. it supports some testings as follow: EV battery pulse charge/discharge, DCIR(Direct Current Internal Resistance), cycle life testing and rate testing.
Specification
Item No. |
ACEY-BT-5V10MA |
||
Input power |
AC 220V ±10% / 50Hz |
||
Input active power |
709mW |
||
Input Resistance |
≥1MΩ |
||
Resolution |
AD:16bit;DA:16bit |
||
Voltage |
Per Channel Voltage Range |
25mV~5V |
|
Discharge Min Voltage |
0V |
||
Accuracy |
± 0.05% of FS |
||
Stability |
± 0.05% of FS |
||
Current |
Per Channel Current Range |
Range one:5uA~1mA; Range two:1mA~5mA; Range three:5mA~10mA |
|
Accuracy |
± 0.05% of FS |
||
Constant Voltage Cut-off Current |
2uA;0.01mA;0.02mA |
||
Stability |
± 0.05% of FS |
||
Power |
Per Channel Output Power |
0.05W |
|
Stability |
±0.1% of FS |
||
Time |
Current Response Time |
(0~Full Range)<20ms |
|
Step Time Range |
≤(365*24)Hour/Step |
||
Data Recording |
Recording Condition |
The minimum time interval:100ms |
|
The minimum voltage interval:10mV |
|||
The minimum current interval:2uA;0.01mA;0.02mA |
|||
Record Frequency |
10Hz |
||
Charge |
Charge Mode |
Constant Current Charge、Constant Voltage Charge、 Constant Current and Constant Voltage Charge、CPC |
|
End Condition |
Voltage、Current、Relative Time、Capacity、-△V |
||
Discharge |
Discharge Mode |
CCD、CPD、CRD |
|
End Condition |
Voltage、Current、Relative Time、Capacity |
||
Pulse |
Charge |
CCC |
|
Discharge |
CCD |
||
Min Pulse Width |
500ms |
||
Pulse Number |
Each pulse step supports 32 different pulses |
||
Automated Switch |
Automated switch from charge to discharge for each pulse |
||
End Condition |
Voltage, Test Time |
||
Noise |
<85dB |
||
Cycle |
Loop Measure Range |
1~65535 times |
|
Max Steps Per Loop |
254 |
||
Nested Loop |
Nested loop Function,Max Support 3 Layers |
||
Protection |
Software Protection |
Power-down Data Protection |
|
Off-line Testing Function |
|||
Setting Protection Condition,Setting Parameter:Low Voltage limit、Upper Voltage limit、Low Current limit、Upper Current limit、Delay Time |
|||
Channel Features |
Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure |
||
Channel Control Mode |
Independent Control |
||
Voltage and Current Testing Sample |
4-wire connecting |
||
Database |
MySQL Database |
||
A Means of Communication of Upper Machine |
TCP/IP Protocol |
||
Data Output |
EXCEL、TXT、Graph |
||
Communication Interface |
Ethernet Port |
||
Per Unit Main Channels No. |
8 |
Product details