This is a multifunctional off grid solar inverter, integrated with a MPPT solar charge controller, a high frequency pure sine ware inverter and a UPS function module in one machine, which is perfect for off grid backup power and self-consumption applications. This inverter can work with or without batteries.
Product: 5KW Off Grid Solar Inverter for Solar System
Introduction
This is a multifunctional off grid solar inverter, integrated with a MPPT solar charge controller, a high frequency pure sine ware inverter and a UPS function module in one machine, which is perfect for off grid backup power and self-consumption applications. This inverter can work with or without batteries.
The whole system also need other devices to achieve complete running such as PV modules, generator, or utility grid. Please consult with your system integrator for other possible system architectures depending on your requirements. The WiFi/GPRS module is a plug-and-play monitoring device to be installed on the inverter. With this device, users can monitor the status of the PV system from the mobile phone or from the website anytime anywhere.
Features
Rate power 5KW, power factor 1
MPPT ranges 120v~430V, 450Voc
High frequency inverter with small size and light weight
Pure sine wave AC output
With CAN/RS485 for BMS communication
WIFI/GPRS remote monitoring (optional)
Parallel operation available (optional)
Product Overview
Specifications
Inverter Module |
5KW |
Rate Output Power |
5KVA/5KW |
Output Voltage Waveform |
Pure sine wave |
Output Voltage Regulation |
230Vac+-5% |
Output Frequency |
50Hz(default)/60Hz |
Peak Efficiency |
93% |
Overload Protection |
5s@≥150% load; 10s@110%~150% load |
Surge Capacity |
2* rated power for 5 seconds |
Nominal DC Input Voltage |
48Vdc |
Cold Start Voltage (Only Lead-Acid) |
46.0Vdc |
Cold Start SOC (Only Li) |
30% |
Low DC Warning Voltage (Only Lead-Acid) |
48.0Vdc @ load < 20% 42.8 @ 20% ≤ load < 50% 40.4Vdc @ load ≥ 50% |
Low DC Warning Return Voltage (Only Lead-Acid) |
46.0Vdc @ load < 20% 44.8 @ 20% ≤ load < 50% 42.4Vdc @ load ≥ 50% |
Low DC Cut-off Voltage (Only Lead-Acid) |
42.0Vdc @ load < 20% 40.8 @ 20% ≤ load < 50% 38.4Vdc @ load ≥ 50% |
Low DC Cut-off Voltage (Only Li) |
42.0Vdc |
Low DC Warning SOC (Only Li) |
Low DC Cut-off Soc+5% |
Low DC Warning Return Voltage (Only Li) |
Low DC Cut-off Soc+10% |
Low DC Cut-off SOC (Only Li) |
Default 20%, 5%~30% Settable |
High DC recovery Voltage |
56.48Vdc |
High DC Cut-off Voltage |
60.8Vdc |
No Load Power Consumption |
<50W |