22kw AC Hybrid Solar Power Pumping System with Grid Utility for Irrigation in Pakistan

Sales

Application : agriculture
Certification : CE
Water Flow : 14-55
Head : 16-21
Power : 2.2KW
Voltage : 24/48VDC
Brand : Longcom
Warranty : 5 years

Product Detail

22kW AC Hybrid Solar Power Pumping System with Grid Utility for Irrigation

1. Solar Water Pumping System Introduction

Solar Water Pumping System

Solar pumping system consists of four parts: solar panels, solar pumping inverter, three phase AC pump and water storage device. The solar pumping inverter converts DC power produced by solar panel to AC power which drives AC pump to pump water from borehole, river, lake etc. to the storage device.

The inverter applies high efficiency MPPT algorithm to maximize power harvested from solar panels.It will make the system to maximize efficiency to get the water as much as possible.The solar pumping system fulfills concept of low carbon,energy conservation,environmental protection to improve the living standard in water-deficient area.

Solar water pump system

Meanwhile, the application of AC PowerPack add grid utility/DG as power supplement or backup for solar energy, can keep pumping system working 24 hours a day.

Solar pump system application

Solar water pump system

3. solar pump system feature

Reliable solution provider in non-electricuty and water deficient area.
Wide application with all kinds of PV modules and three-phase AC pumps
IP65 for outdoors application
Max. operation temperature 60ºC
GPRS remote monitoring for real time operation status and control on/off
Excellent performance during cloudy weather with 5% more water output compared to competitors
ROI is only less than 2 years compared to diesel generator
Full automatic unattended operation with perfect protection functions for long lifespan 25 years
3 years warranty time for complete system, 10 years for PV modules

Main Equipment Details

Solar water pump system

Solar Mounting Structure

The modules support structure is mild steel, hot dipped galvanized. It is of adequate strength and appropriate design, which can withstand load of modules and high wind velocities up to 150 km/h. All nuts and bolts are made of very good quality and are corrosion resistant. Structure is easy replacement of any module. Fabricated can be grouted,rooftop, carpacking style.

d.c. Max. Input Voltage	880Vdc
Recommended MPPT Voltage	460~850Vdc
d.c. Max. Input Current	49A
Max. Motor Output Power	22kW
Rated Output Voltage	380 ~ 460 Vac
Output Frequency	0~50/60Hz
Rated Output Current	42A

PV Cable

Item:PV1-F 1×4mm2 Nominal cross-sectional area of conductor: 4mm2 Conductor size: 56/0.3 Conductor DC resistance: 5.09Ω/km Max. Permit Voltage 1000VDC Maximum operating current 8A Environment: -40ºC~+120ºC

AC Cable

Model: JHS Waterproof No. of cores: 4 cores Rated power-frequency voltage: 300/500V No. of cores*sectional area: 3*35mm2+1*6mm Insulation thickness(mm) 1.0+1.0 Sheath thickness(mm) 2.0 admissible operating temperature of the conductor:-20~+65ºC