Advantages
1.Mitsubishi IPM module structure design, easy and convenient for maintenance.
2.Little fault rate < 1%
3.Power frequency transformer, 100% full power stable output
4.High efficiency > 94%
5.Long service life > 15 years
6.Setting flexible: input and output voltage, frequency can be set
7.Two kinds of work mode: Variable frequency start and step down voltage start
8.Big LCD display all running parameters and fault code
9.RS485 monitoring optional
10.Can work 24h*7, durable and suitable for harsh environment
Structure
Connection port
Specification
Model |
SDP-200KW |
|
Isolation mode |
Low Frequency Transformer |
|
DC Input |
Rated voltage (Vdc) |
600V |
Rated current(A) |
333.3A |
|
AC Output |
Rated output power |
200KW |
Output waveform |
Pure Sine Wave |
|
Rated Voltage |
380VAC±3% |
|
Phases |
3 phase 4 wire |
|
Rated current(A) |
303A (phase current) |
|
Frequency |
50Hz or 60Hz |
|
Rated output voltage range (V) |
380/400/415/440VAC optional |
|
Power Factor(PF) |
0.9 |
|
Overload Ability |
150%, 5 seconds |
|
Efficiency |
>93% |
|
Waveform distortion rate (THD) |
≤2% (Linear load) ≤3% (The nonlinear loads)
|
|
Dynamic Response (0 to 100% load) |
5%,≤50ms |
|
Display |
LCD |
|
Running mode |
Working continuously |
|
Electrical insulation properties |
2000Vac, 1 Minute |
|
Protection Function |
Protection |
Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc. |
Cooling method |
Fan-cooled |
|
Short-circuit protection |
No automatic recovery, need to restart the machine |
|
Working environment |
Noise ( 1 meter) |
≤50dB |
Degree of protection |
IP20(indoor) |
|
Working Altitude(m) |
≤2000 |
|
Working temperature |
-25~+55℃ |
|
relative humidity |
0~90%,non-condensing |
|
Mechanical dimension |
Depth* Width * Height |
1200x1200x1860mm |
Weight (Kg) |
1500Kg |