2 pieces ball valve flange end direct mounting pad

The high-platform 2 pieces ball valve and the flange gate valve belong to the same type of valve, the difference is in its closing part is a ball, the ball around the valve body center line for rotation to achieve opening, closing a valve. Ball valve in the pipeline is mainly used to cut, distribute and change the flow direction of the medium. Two-piece ball valve, three-piece ball valve, is widely used a new type of valve.

Points for attention:

1. keep the valve handle rotating position.

2. can not be used as throttling.

3. Ball valve with transmission mechanism shall be installed upright.

Advantages:

1. the fluid resistance is small, its resistance coefficient is equal to the pipe section of the same length.

2. structure is simple, small size and light weight.

3. Close and reliable the ball valve sealing surface materials are widely used plastic, good sealing, in the vacuum system has been widely used.

4. operation is convenient, open and close quickly, from full open to full close as long as rotating 90°, easy to remote control.

5. maintenance is convenient, ball valve structure is simple, sealing ring is generally active, disassembly and replacement are more convenient.

6. when fully open or closed, the sealing surface of the ball and seat is isolated from the medium, and when the medium passes, it will not cause erosion of the valve sealing surface.

7. wide range of application, diameter from small to a few millimetres, large to a few meters, from high vacuum to high pressure can be applied. When the ball rotates 90 degrees, it should all present the sphere at the inlet and outlet, thus truncating the flow.

High platform ball valve is a new type of ball valve, it has its own unique structure of some advantages, such as switch without friction, sealing is not easy to wear, opening and closing torque is small. This reduces the specification of the actuator. With multi-turn electric actuator, the medium can be adjusted and cut off tightly. Widely used in petroleum, chemical industry, urban water supply and drainage and other strict cut off conditions.

Unit:mm

Unit:mm

Unit:mm

Packing & Delivery : 

Packing Details  : all 2 pieces ball valve by seaworthy plywood case and packed strongly by packing belt as below

Delivery Details : Generally it is 5-10 days if the goods are in stock. or 15-30 days if the goods are OEM or not enough subject to the order quantity. But anyway, normally, we are able to make sure the delivery will not exceed 45 days.