Product introduction:
Highest blackness, excellent hiding power, slightly brown phase, preferred for full spraying
| Model NO. | M-107P | Substrate | Steel |
| Certification | ISO14001 | Tin | Matel and Plastic |
| Appearance | Liquid | Level | Finish Coat |
| Main Raw Material | Acrylic | Method | Spray |
| Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
| Shelf Life | 2Years | Qty/CTN | 12tins |
| Trademark | Meklon | HS Code | 320820 |
1K Super Special Black Car Paint Has Strong Covering Power
The 1K vehicle coating only serves as the background color, and the paint film protects the surface. The hardness of 2K is better than that of 1K.
1k means that the resin in the paint is a single component, which belongs to volatile varnish, and the car paint surface does not have luster after drying
Super special black color characteristics: it belongs to the color with the highest blackness in 1K color including black. It has excellent hiding power and a slight brown color. It is the first choice for full spraying.
Here are the customer feedback photos. Come and have a look
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
| Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
|
The Mixing Ratio： (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
| Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
|
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber：1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
|
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
