100G 1310nm SOA Optical Amplifier
O-band 1310nm 100G SOA optical amplifier can amplify optical signal with wavelength 1270~1330nm. The product has two operation modes: ACC and APC. The product features as stable output power, low NF and low PDG. This series SOA can support optical amplification with date rate under 160Gb/s.
Parameter
Parameter |
Condition |
Min |
Typ |
Max |
Unit |
Wavelength Range |
40GE |
1260 |
|
1340 |
nm |
Wavelength Range |
100GE |
1290 |
|
1320 |
nm |
Total Input power |
|
-20 |
|
-10 |
dBm |
Saturation Output Power |
|
|
10 |
|
dBm |
Gain |
|
|
14 |
|
dB |
Gain ripple |
|
|
7.5 |
|
dB |
Noise Figure |
|
|
|
2 |
dB |
PDG |
|
-5 |
|
50 |
℃ |
Operating Temperature |
|
5 |
|
95 |
% |
Operating Humidity |
|
-40 |
|
85 |
℃ |
Storage Temperature |
220VAC,-48VDC |
V |
|||
Power Consumption |
1 SOA |
|
|
10 |
W |
2 SOA |
|
|
20 |
W |
|
4 SOA |
|
|
40 |
W |
|
Dimension |
1U 19’’ 482.6x245x43.6 |
mm |
|||
Connector |
Can be Custermerized |
Order Information
Part No. |
Type |
RD-SOA-A1-1310-10/GXX |
SOA 1 in 1 out |
RD-SOA-A2-1310-10/GXX |
SOA 2 in 2 out |
RD-SOA-A4-1310-10/GXX |
SOA 4 in 4 out |
Application
Case 1: 100G long distance optical link transmission
The transmission distance of traditional 100GBese-LR4 optical link is limited to 10km. In the transmission of long distance or high loss optical fibers, SOA optical amplifier can be configured to amplify the weak optical power signal on the receiving side to meet the receiving requirements of the equipment.
Case 2:Data link acquisition amplification
In the application of data link acquisition, the optical signal of 100G replication link should usually go through a secondary splitting. The SOA optical amplifier can be configured to amplify the optical signal of the replication link before secondary splitting to ensure that the optical signal after secondary splitting meets the transmission requirements,