110v 120 volt ac dc 12v led strip power supply 10 amp

Sales

SMT-012-120VWJ is a input voltage 100-277vac, output 12v 10a 120w non dimmable non class 2 led driver / power supply.120W led driver can be used with Neon LED of GLLS delivers remarkably fluid color transitions.

Certification : UL/cUL,FCC,CE,ROHS
Dimming mode : non dimming
Size : 220*93*41mm
Working Mode : constant voltage
Output Current : 10a
Output Voltage : 12vdc
Input Voltage : 100-277vac

Product Detail

110v 120 volt ac dc 12v led strip power supply 10 amp

SMT-012-120VWJ is a input voltage 100-277vac, output 12v 10a 120w non dimmable non class 2 led driver / power supply. This model follows UL 8750 standard, pass FCC certificate, withstandard voltage 3.75KV, provide 7 years warranty. avaliabel to be widely used in LED indoor applications for LED puck light, LED chandelier,Neon LED of GLLS,led modules of ledwatcher etc..

Specifications

model		SMT-012-120VWJ	SMT-024-120VWJ
Output	DC Voltage	12V	24V
	Voltage Accuracy	±0.5V	±0.5V
	Voltage Regulation	±0.5%
	Load Regulation	±2%
	Rated current	10.00A	5.00A
	Rated power	120W
Input	Voltage Range	100~277V AC
	Frequency Range	47～63HZ
	Power Factor ( Typ.）	0.99@120VAC 0.96@277VAC	0.98@120VAC 0.96@277VAC
	Full Load Efficiency（Typ.）	80%@120V 84%@230V 84%@277V	85%@120V 88%@230V 88%@277V
	AC Current（Typ.）	1.71A@100VAC
	Leakage current	<0.50mA
Protection	Short Circuit	shut down o/p voltage, re-power on to recover after fault condition is removed
	Over Loading	≤120% constant current limiting, auto-recovery
	Over temperature	100℃±10℃ shut down o/p voltage, automatically recover after cooling.
	Over voltage	≦140VAC(100~130V) , ≦270VAC(170~277V)
Environment	Working TEMP.	-40～+60℃
	Working Humidity	20～90%RH,non-condensing
	Storage TEM.,Humidity	-40～+80℃，10～95%RH
	TEMP.coefficient	±0.03%/℃（0～50℃）
	Vibration	10～500Hz，2G 10min./1 cycle，period for 60min.each along X,Y,Z axes
Safety&EMC	Safety standards	UL8750, UL1012
	Withstand voltage	I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC
	Isolation resistance	I/P-O/P：100MΩ/500VDC/25℃/70%RH
	EMC EMISSION	FCC Part 15 B
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11,EN61547 Alight industry level （surge4KV）
Others	Weight	1.3Kg
	Size	2209341mm (LWH)
	packing	329279176mm , 10PCS/ctn
	Notes	1. All parameters NOT specially mentioned are measured at 110V/277VAC input , rated load and 25℃of ambient temperature. 2. Tolerance:includes set us tolerance,line regulation and load regulation .
Label

Dimension of our 12v 10a UL power supply with junction box:

FAQ: How can we connect multi-LEDs to one led driver?

Answer: During the LED applications, its a common to make the connection of 1 driver for 1 LEDs, but if you would want to connect multi-LEDs to one LED driver, that is acceptable as well. but kindly note just connected the LEDs in parallel to a constant voltage LED driver, so that the brightless of each LEDs will be the same and won't cause drop voltage problem. see below connection diagram: